For those looking for something less expensive, look into the Powervar advertised here on Audiogon.
Picked one up myself recently and the difference it makes was NOT subtle.
Power Conditioning experience...
Let me start with a quote…
Last week I took delivery of a Furman IT Reference 20i power conditioner and I must say that I should have done this a long time ago! As much as I do not want to be over the top in writing this, it can’t be helped. (Let me mention here that it was several days after hooking it up before I was able to give a good listen, more as to why later; so if there was some break-in or warm up period that took place, I cannot comment.)
Let me save some of you the trouble of looking, the Furman unit I have lists for $3500, not cheap! (If one is interested though, shop around.) I realize that there are some here that may not have that amount, or much more than that, in their entire system; I only have experience with this piece.
I am simply stunned every time I play my system and it doesn’t matter the source, digital front-end, tuner or satellite radio from my dish. The differences I hear are many, such as, sound stage - depth and width -, imaging, dynamics, bottom end - weight and tautness - and the “blackness” mentioned by RH. This “blackness” is an interesting one to me as I have questioned it in the past and still find it hard to put into words but when you hear it, or rather don’t, you know it. I wish I was better at my descriptions as even though I know I have claimed a lot, there is more.
Adding this unit has drastically changed my system for the better and I wanted to share this with others; I realize this is a lot of money, whether you can get the same for less money I don’t know, but it is an addition I cannot recommend highly enough. (I realize there are many factors where the effects may differ from one another, but consider RH’s last line in the quote above.) I now wonder how some past pieces I have owned would have performed had I had something like this.
I have questioned my McIntosh gear at times in the area of dynamics and bottom end, as Mac amps are known to be slightly less dynamic and softer on the extremes; these areas have been greatly improved. Other gear may still be better in these areas but I am not sure the differences would be enough for me to give up all I like in the Mac gear.
I mentioned above that it took several days for me to give a good listen, this was due to two circumstances, one I was busy with the holidays and two, I have an issue with a hum when I use the outlet dedicated for the amp, so I have the amp plugged in another section of the Furman while I track this down with Furman, but with the holidays we are missing each other. (It was plugged in on Monday I listened on Friday, hum free.) This has led to some of the most pleasurable listening I have ever done, listening that Friday for some 2 hours straight and 3 hours+ the following day, something I can’t say I have done in a long time, if ever; but song after song I am amazed, even hours later.
I’d like to give a special thanks to AG member Victor Boccalon (Victorbm3) as he also has a Furman unit and gave me great input before I made my purchase, though I still never expected the results to this level.
Hopefully others can chime in with their experience.
I close with returning to the opening quote from RH, in my experience his words are very true, and if anything conservative; that said, I took this quote from the Audio Advisor magazine and it looks like an abbreviated quote.
Brian
”The sonic benefits of a good line conditioner include a “blacker” background with less low-level grunge and noise. The music seems to emerge from a perfectly quiet and black space, rather than a grayish background… If you haven’t tried a power-line conditioner, you may not have heard your system at its best.” -Robert Harley, The Complete Guide to High-End AudioI have never looked into power conditioning units in the past and if I had to analyze why I would suspect two reasons, one is the cost and two being skeptical. While I could understand having something in place to protect all my gear, I didn’t want to purchase something that may hinder the performance either, which is what I envisioned in something “inexpensive”, right or wrong.
Last week I took delivery of a Furman IT Reference 20i power conditioner and I must say that I should have done this a long time ago! As much as I do not want to be over the top in writing this, it can’t be helped. (Let me mention here that it was several days after hooking it up before I was able to give a good listen, more as to why later; so if there was some break-in or warm up period that took place, I cannot comment.)
Let me save some of you the trouble of looking, the Furman unit I have lists for $3500, not cheap! (If one is interested though, shop around.) I realize that there are some here that may not have that amount, or much more than that, in their entire system; I only have experience with this piece.
I am simply stunned every time I play my system and it doesn’t matter the source, digital front-end, tuner or satellite radio from my dish. The differences I hear are many, such as, sound stage - depth and width -, imaging, dynamics, bottom end - weight and tautness - and the “blackness” mentioned by RH. This “blackness” is an interesting one to me as I have questioned it in the past and still find it hard to put into words but when you hear it, or rather don’t, you know it. I wish I was better at my descriptions as even though I know I have claimed a lot, there is more.
Adding this unit has drastically changed my system for the better and I wanted to share this with others; I realize this is a lot of money, whether you can get the same for less money I don’t know, but it is an addition I cannot recommend highly enough. (I realize there are many factors where the effects may differ from one another, but consider RH’s last line in the quote above.) I now wonder how some past pieces I have owned would have performed had I had something like this.
I have questioned my McIntosh gear at times in the area of dynamics and bottom end, as Mac amps are known to be slightly less dynamic and softer on the extremes; these areas have been greatly improved. Other gear may still be better in these areas but I am not sure the differences would be enough for me to give up all I like in the Mac gear.
I mentioned above that it took several days for me to give a good listen, this was due to two circumstances, one I was busy with the holidays and two, I have an issue with a hum when I use the outlet dedicated for the amp, so I have the amp plugged in another section of the Furman while I track this down with Furman, but with the holidays we are missing each other. (It was plugged in on Monday I listened on Friday, hum free.) This has led to some of the most pleasurable listening I have ever done, listening that Friday for some 2 hours straight and 3 hours+ the following day, something I can’t say I have done in a long time, if ever; but song after song I am amazed, even hours later.
I’d like to give a special thanks to AG member Victor Boccalon (Victorbm3) as he also has a Furman unit and gave me great input before I made my purchase, though I still never expected the results to this level.
Hopefully others can chime in with their experience.
I close with returning to the opening quote from RH, in my experience his words are very true, and if anything conservative; that said, I took this quote from the Audio Advisor magazine and it looks like an abbreviated quote.
Brian
13 responses Add your response
