I just last week changed pc to a Lief Series Red Dawn..UNLIKE the Lief Red Dawn speaker cables,which were a revelation,the pc did nothing,no change,zipp,nada....
16 responses Add your response
I use a Vishnu on my digital frontend and I am very happy with it. On my player I find it is very fast and open and not at all lean or sterile. So far between my group of Kimber and Wywires PC’s I own, on my CD player it is the favorite where it resides. The other cables do a great job but I find the Vishnu gets out of the way better and I think less of what it’s doing compared to the others.
..... sitting here on an early Saturday morning and reading this post. I am laughing as nobody has really worked with the OP in helping him with this situation. Instead the usual responses which are so typical from the usual cast of cast characters that add nothing except to be the first to answer every new thread. Although Jacca and Adg101 made attempts to help the OP as Nordost cables as noted ; are system depended like many cables and don't work on all systems as can be attested here over and over again by the many threads addressing this very same issue. Nothing is wrong with you or the cables or your system, it's what your ears hear and what you like which is what makes this '' hobby '' fun and entertaining. To quote ; Jafant ; Happy Listening !!!! Back to my coffee......
Not to keep plugging Wywires but there’s a reason I do and it’s because of two main reasons. The first is Alex prefers to do a consultation which he called me to get the list of my components, what I like in a system as far to get an understanding of how I hear things and the types of music I listen to. He probably has a lot more knowledge and experience building cables than I do so better to trust a pro. From there he researches your components then builds the cable based on your needs. Secondly they just sound wonderful or actually don’t sound as of all the cables I have tried they just get out of the way. The email you may make and the call you’ll get from Alex will cost you nothing but your time so maybe that’s the best advice I can give.
Having upgraded my power cords to Frey2 from wall to an QB4 , and then Frey 2 to feed my Accuphase E-470 , and for the moment using
Heimdall 2 to feed my Lumin T1 , i can only say it was a real lift..i started out with the Heimdall 2 , and then it moved up the chain ( speaking from wall placement ) as one other said they really do need a long break in , i think if i remember correctly Nordost says 100 hours , in my experience it takes longer to really fall into place. So have patience.
And having tried Valhalla2 Powercord , is also really good , had it on trial.
My report was fresh from the box, no break in. I am a believer in break-in, seen it many times. I just found such an improvement with the source gear with no break in, I guess I expected the same to continue.
I think the Q-Base QB8 distribution block will be my next purchase, and some solid supports for it.
Agree. I don’t buy into one has to use the same cable manufacturer throughout. Even if every component in your rack is made by the same manufacture it doesn’t make a difference. For one thing, room acoustics will have a play in the sound more than most people realize; some rooms just flat out suck... so we go down the rabbit hole chasing new components without ever addressing the problem that is the room. I know I’ve preached it and I think others have as well that cables are tone controls because most our gear has no means to correct a poor sounding room or the quality of the recording. Cables are tone controls and I don’t care if you have the most expensive wire out there. So I say mix cables as needed just like we mix the manufactures of or equipment. I’ve had great luck mixing WyWires, Kimber, Nordost and Clear Day together. I’ve had great success with each line as a full system and I suppose that’s why I have a mix... actually never had a full Nordost set but I like their cables on my digital gear.
I just added a Bluesound Node II and I’m loving it. I built my own PC and purchased an Ethernet cable and using the DAC in my CD player and it sounds great. Last night I felt as things are settling in the presentation was a little too crisp but not bright or fatiguing but just not right. I know my cables very well so I switched my Clear Day balance cable between my DAC and preamp with the balanced WyWires between preamp and amp and that did it... sounds wonderful. It was a subtle change but it was needed and I wasn’t surprised by the results.
My point is (again) cables are tone controls and just like equipment manufactures, cable manufactures have a house sound so it doesn’t mean one cable company fits all. If one buys into you have to stick with one cable manufacture then I would think one would stick with one equipment manufacture as well which I bet most of us don’t follow. Cables are tone controls; no cable is perfect and the best of cables do one thing better than so so cables and that is get out of the way and let the gear do its job. If ones gear sounds like you know what, a great cable is going to sound like you know what?
Totally agree with Elizabeth. Mix a way.