Suggest a XLR cable with Bass Response

I won’t suggest a Cable from a brand but will reference a wire type I use as an interconnect, which is a wire able to be found used in Cables from respected brands.  

My perception of this D.U.C.C Wire in use is that it presents with a Tonal Richness, which adds weight to the lower registers, but preserves the attractive sonic traits, such as Attack - Coherence - Dynamics - Envelope - Micro Dynamics - Timbre - Tone.

There are plenty of past experiences with wire types used as an interconnect and speaker cable that boosted the bottom end but trashed the attractive sonic traits.

Wire World tends to fit this bill in part because it does seem to tone down the mid-treble... lleaving more room for bass.  Especially the mid range Eclipse line.  My memory is old though, may no longer be the same. 

Thanks for the suggestions! I will look into them.

The ISO-Max instructions says to use a short XLR interconnect 1 meter or less. I am currently using a DIY solid .9999 silver cable about .5M. So, I'm sure there must be better options.

ozzy

I am no expert by any means but I use a 25ft pair of these XLRs from Pre-out to my subs. Works really well and sound great. DH Labs has a good reputation. For a really short run you could step up the line without spending crazy money, however the BL-1 is what they recommended for my subs. Not sure if they sell single cables. Can’t see why not though.

https://silversonic.com/products/interconnects/bl-1/ 

macg19,

I do have a 1/2-meter DH Labs cable somewhere and as I recall they were very good for the cost. Not sure if they would be the best for subs but they would be worth a try.

Alas, mine is RCA and I need XLR.

ozzy