Micromega M100 vs Coda CSib, vs Pass ? vs


I’ve been running a Micromega M100 for a few months that initially I did not care for. Not sure what happened but now I really like it. I was thinking back and it’s possible I had the room correction engaged from the previous owner.
Between the M100 and a few other items I can sell I can round up probably 6 grand. Would anything in that price range used be a substantial improvement to the Micromega. I would lose the very good DAC in the Micromega so would prob need to budget at least 1k out of the 6 for a DAC. 
Driving Pioneer S-1ex and Focal 836w. Listen to Rock, Acoustic Rock, outlaw country, metal, Reggae (sometimes). 

Thanks
mofojo

we sell  micromega coda and krell

 

the coda setup with a great dac bricasti m3 will be a fantastic setup

 

or for an all in one the krell k300iis fantastic

 

please contact us for an more in depth disscusion.

Dave and Troy

Audio0 intellect nj

coda, krell micromegs dealers

 

The new AGD Tempo di GaN stereo amp at $5500 might be an upgrade as more than one reviewer has termed the “end game” level amps. Pair it with something like a Musician Pegasus R2R DAC and you may have something pretty special. Just one option to consider.

http://enjoythemusic.com/magazine/equipment/1221/AGD_Tempo_di_GaN_Stereo_Amplifier_Review.htm

https://soundnews.net/sources/dacs/musician-audio-pegasus-r2r-dac-review/

"BTW - I think prices of audio gear is utter BS for the most part. "

Amen to that!

BTW - I think prices of audio gear is utter BS for the most part. I like CODA, Benchmark, and KRELL for the value I get from their products. I also like the Chinese DACs, Topping, Gustard, and now Musetec.

Your room is the most important factor in setting up your system. A CSiB would drive most speakers well in a moderately sized room (use volume calculation). If you need room treatments or things like DSP (Convolution in ROON, DSP in hardware), those are more important to me than more money on speakers.

If I were you, I would get the ROON READY KRELL K-300i integrated and find a suitable speaker for it. If you use the internal DAC in it like I do for my bedroom system you can have digital streaming up with just 1 Ethernet cable. I had a young family member come over yesterday from Ohio. I found out he was looking to buy a system. I told him to get the KRELL K-300i. Not only does it sound great with my Thiel CS3.7’s, but it has also so many features. It is also the very best sound with my RAAL SR1a headphones which is an added bonus, and something he said he will buy.

@tmac1700 I had a CSiB from 2019 and the amp section on that was not the latest (supposedly the current CSiB is the same as the #8). I found that the clarity on the CSiB was not the very best I have owned. My Benchmark LA4 + AHB2 (same price as CSiB) was better at that. Given a proper speaker match I would take the Benchmark pair over the CSiB any day. I love the Benchmark sound, though it is not for everyone. I use AHB2 mono in my living room with KEF LS50’s (until better speakers).

I now own the CODA 07x and CODA #8 in my office system. I am planning to get the CODA #16 if some investments work out. The #16 is noticeable better than the #8. The #16 sounds like the AHB2 in terms of clarity. It also has many other attributes that differentiate it from the AHB2, more power, warmth and others. I would have been better off not listening to the #16 with the 07x preamp. I was already happy with the #8. The latest CSiB should sound like the #8 in the amp section.

The 07x and #8 are more refined than the CSiB I owned. In fact, the buyer of my CSiB sold it to someone else because he also said he wanted a bit more clarity on top. The 07x and #8 pairing are a bit better and I hear more on top, and the bass is great with my hard to drive Thiel CS3.7 speakers. This may not be worth the extra money to you, but it was to me.

Another big reason I went with the CODA 07x preamp was because I have a killer headphone, the RAAL SR1a, and I am able to "roll amps" with the dual XLR outputs on the 07x. One set to my CODA #8 + Thiel CS3.7 and the other set to another amp + RAAL SR1a. At the moment I am rolling a Parasound A21+.

A couple of points of interest. The CODA 07x is not dead silent, it has a bit of hiss. It also has source leaks when multiple sources are playing at the same time. This is by design to get the best sound from a single source that is playing. I hate the volume control since it is easy to bump and mess up the balance settings. My wife’s dog has done this a few times. I hated the volume control of the CSib because it was buttons. The remote control for the CSiB and 07x are the same and it is awful to use. However, the 07x and #8 do sound wonderful together.

There are times when I want an utterly quiet preamp sound, so I have my Benchmark LA4 ($2500) also in my office system. I will post some photos of this tonight on Virtual Systems. I am DONE with the office system now.

The final piece to this system was the incredible Musetec 005 DAC. I got it on the sale price of $2969. The very best DAC I have owned. In a perfect world I would have 3 of them for my 3 systems. Read the Mustec thread on A’gon.

L.K.S Audio MH-DA005 ES9038 Pro x 2 DAC Coaxial OPT AES EBU Flagship (shenzhenaudio.com)

In regards to CODA...

Couple things... mostly for @audiotroy and @yyzsantabarbara

 

..

When paired with the right dac...which dacs are we talking about? I had either the denaphrips pontus ii or venus ii in mind.

Can u guys describe the sound signature for coda and what kind a speakers pairs well with it? CODA seems to fly under the radar and because of that it’s hard to find people who talk about their experiences with it. The csib should be able to let most speakers shine at their best should it not? I always hear good clean current is important in an amp and one way to tell if a amp does that is by looking at its specs and if the watts double into 4ohm and tipple into 2ohm then that shows the amplifier is able to get the very best out of most speakers. Seems as though csib does this. Would u guys be comfortable pairing it the csib with $10-15000 speakers or is about $7-8000 speakers the limit?

 

I’m all over the map with this because for some reason I’m drawn to tge CODA csib. Maybe it’s because it seems to have a great performance for the money value. It also looks great in silver. I just never heard one. And haven’t found many people who have.

@mojo I was considering the Micromega along with the KRELL and CODA. I did not want DSP on my unit (I prefer a computer) so that was a deciding factor for me to not try the Micromega. I was at first down on the amp fan (I think Micromega has one) but my KRELL also has a fan and I do not hear it sitting 1 foot from it.

I actually did sell my KRELL K-300i but took it back because the buyer had some issue with the lettering on the faceplate. I never noticed it when I sold it. I am so happy I still have the unit. I sent it back to KRELL to fix the faceplate, and they replaced it with a completely new faceplate. The new ones no longer have white lettering pasted on. Instead it is grey lettering that is etched on the faceplate.
I’m really starting to appreciate the Micromega with the Focals, just a great synergy. I like it with the Pioneers as well but am kinda dumbfounded I may be liking the much cheaper Focals more. 
Sounds like the Krell is something I should definitely check out if I ran across one with the right price.  If I decide to try something Ill definitely keep the Micromega until I can do proper comparison. Too many times I’ve sold something without a side by side and left thinking hmmmmm….. I wonder. 
@mofojo I did a comparison last night with the KRELL K-300i vs CODA separates, 07x + #8 using my RAAL SR1a headphones. The KRELL was my favorite by a lot. It is the stronger bass on the KRELL that really makes the RAAL work great (It is a bit bass shy).

On my floor standers I would say the CODA separates is preferred by the slimiest of margins over the KRELL K-300i. They sound different. The CODA separates are better than the CSiB.

I also compared the internal DAC on the KRELL with my Benchmark DAC3B and it was close but I preferred the Benchmark DAC3B to the KRELL’s internal DAC. If I did not have 2 better DACs than the KRELL’s internal DAC, I would be happy to use the internal DAC.

As I stated previously the HDMI on the KRELL DAC is very nice and easy to use with ARC return. I have a Roku, an Oppo BluRay, and Cable TV also hooked up to the KRELL via HDMI. I also use TOSLINK from the TV into the DAC3B and then into 1 of the sources on the KRELL. Also great sound. A very nimble feature rich unit.

It took me a while to appreciate it but the KRELL K-300i is now my fav integrated. Like it over the following:

- CODA CSiB
- Mark Levinson 585
- Luxman 509x
- PeachTree Nova 150

ye s we sell all three the coda csib with the right dac is extraodinary the krell k3001 is fantastic as a dac amp and streamer for the price with the dac and streamer it is pretty hrd to beat

the m100 is also a geeat all around performer it really depends onj the synergy with the loudspeakers

dave and troy
audio intellect nj
micromega, coda and krell dealers
@audiotroy is a dealer of micromega and coda so should be able to offer a comparison of those two
I’m adding Ayre to the list to consider as well. Everything I read about them is just excellent. 
I have owned the CSiB (bulit in Sept 2019 so not latest amp section). I liked my KRELL K-300i better than the CODA CSiB. I have the CODA separates now, 07x + #8. I like the CODA separates more than the KRELL K-300i  but it is a very close call.

The KRELL is very useful in that it has a built-in DAC option which is great with HDMI sources. The DAC for USB streaming music is only OK but it does have the best ROON READY endpoint I have (I have 4 of them). I have  are better usb external DACs.

The sound of the CSiB and KRELL are a matter of preference. The KRELL is smoother and more powerful, with the first 90 watts in Class A. A fantastic integrated amp. This goes for sale on the used market around $5K, maybe lower.

************************************

I was using 3 DSP filters on 3 different systems on my ROON Core. I do know what it is like to use the wrong DSP filter on the wrong system. The system can sound subtlety wrong or really messed up. I bet you had the DSP enabled from the previous owner.

I am not using DSP now since I improved my external acoustic panels positioning.