2. home-theater
  3. 1367880910

Any B&K Ref. 30 Gurus out there?

Trying to set-up Zone 2 to run some patio speakers. Followed the limited instructions in the manual but get no sound. All components being linked are operational, cables are to/from the correct jacks, etc. so it either a set-up problem or a problem in the Ref 30 (hopefully not the latter).

Would be very much appreciative of anybody that could walk me through the set-up procedure?

Thanks, Mark
128x128marco1

Showing 3 responses by bdgregory

bdgregory
1,708 posts
 
sorry - most obvious question but - Are you sure you have Zone 2 powered on? It's a separate remote iirc . . .
bdgregory
1,708 posts
 
afaik you don't need the remote - it works fine from the front panel. But, do you know that you have the correct sources selected? My recollection is operating zone 2 w/o the remote is confusing at best. But, if you can be sure you have the right sources selected, and are operating volume for zone 2, etc you may be ok. You may be able to get a universal remote and program it for zone 2 if you want. There are old B&K remotes on ebay all the time. They have a different code for zone 2. I have also seen zone 2 remotes listed.

Finally - just to be sure - zone 2 has no digital function. Your sources must be connected to the analog inputs or you won't hear anything.
bdgregory
1,708 posts
 
puzzling . . . I'm out of ideas except to check if somehow the zone 2 mute is engaged?
More to discover