Anti static foam?


I'm thinking about trying this tweak and am curious how you install it (Elizabeth?). Do you just pack it in your equipment or do you have to put something between the foam and the boards? I don't want to start a fire or short out a circuit. At the low cost of this anti static foam, and with the crazy amounts of static I have here in the cold dry air here in Colorado, I'm thinking that this would be a worthwile thing to do but I just need some instruction on what and what not to do when installing the foam in my components and which components I can do and which ones I shouldn't do. Thanks!
128x128b_limo
Hey, Elizabeth, is the pink foam okay? No one around me has black foam but they do have the pink foam. And as far as baggies to put the foam in, should I be using the anti-static baggies from the computer stores? Thanks again!!
Pb, thanks for the offer :-)
I love how much audio geeks (myself included) are willing to help one another out for absolutly no gain!

Elizabeth, thank you, it makes sense now and i will be doing this tweek; I'll report back my results!
Post removed 
B

I must have 100 of of these sheets laying around drop me an email and I'll mail you a few. Try it out and let us know how it works out for you.

Good listening

Peter
Just to be clear, I have no idea if this tweak has any technical validity behind it and I sure don't know if it works. And w my degree of technical astuteness (not), there is no way I'm messing around w the innards of my digital gear.
Lol , you guys...

Ookay, sorry Elizabeth, I'm slow so once more; I'm going to cut little squares of this foam and place it on my dac chips but I first put a small square piece of plastic baggy directly on the chip, and then the foam on top of the plastic baggie? This is the part that I'm not certain of.

And you said your dac is stuffed with it; plastic baggie then foam packed to the brim on top of the baggie, baggie on top of chips?

If this is the case, would it just be best to lay a baggy covering the entire inside of the dac, with foam stuffed all over on top of that ?

Also, I was thinking of putting dynamat on the inside of the cover; any luck with that or should I not do that?

Thanks again!
Okay, but to be honest, Elizabeth did allude to it. Whether inadvertently or not. Geoff is way too smart for our own good!
Swampwalker wrote,

"Geoffkait- Elizabeth did not say the the foam's antistatic properties were the reason why it worked. What she actually said was: "The idea of the antistatic foam is to remove the RFI as it is generated, suck it up and ground it to the chassis.""

Hmmmm. Thanks, anyway, but I'll pass.

:-)
Post removed 
Geoffkait- Elizabeth did not say the the foam's antistatic properties were the reason why it worked. What she actually said was:
The idea of the antistatic foam is to remove the RFI as it is generated, suck it up and ground it to the chassis.
Csontos- The problem w this tweak is that the aliens who pilot the little flying saucers that Geoff sells, are allergic to the foam ;-)
Come on Geoff, this is right up your alley! Don't like the competition, eh?

You can now proceed to educate us on the actual sonic effects of static and subsequently,on it's removal. But especially the tweak to do so. There's gotta be something scary going on in the air.
Post removed 
Bounce dryer sheets. Place atop gear and touch before touching any gear. Works wonders and is dirt cheap. Also, increasing the relative humidity in your listening room is a very good idea. Buy a decent humidifier and most of your troubles go away...

-RW-
B_limo...I get the occasional little zap here and there, but I would never classify it as a "crazy amount". I was born in this part of the country and have lived here all my 53 years.

Maybe I'm just immune to it :-)
This seems like a good time to mention that static has nothing whatsoever to do with RFI. Carry on, smoke if you got 'em.
I would definitely not put this stuff in your amp. Not even against chassis walls. What ever you put it in, it will insulate. I mean it will keep and accumulate heat. That would absolutely change the sound of your amp. Probably your pre-amp also. I wonder if anyone's done any listening tests using identical components with and without it.
Mofi , got bored and looked up the top ten driest states in the U.S.;Wyoming was third, Colorado was seventh fwiw :-)
Thanks Elizabeth :-)
I'm still a little confused about the install. I think I'll start with my dac; do I place a square piece of cardboard equal to the size of the dac o. Top of the board? Is it okay just resting thdre on top? And then just place the foam on top of the cardboard? Or is it better to have it form fitting and squished a little bit and placed against the cover? And how do I ground the baggies or foam to the chasis? If the foam is touching, and form fitted to, say the cover, would that ground the foam to the chasis?

Thanks for your help! I'm really trying to chase down the inexpensive tweaks now that I've got all the expensive ones out of the way ;-)
I'm going to purchase one of the croyed hubble outlets that you suggested in another thread too! Are the 20 amp versions okay even though it's going in a 15 amp outlet (?) as long as I don't hook anything rated at 20 amps into it?


Mofi, I'm suprised you haven't encountered static in the dry cold climate of Colorado. Everyone I know has crazy smounts of static in there homes, shoot, even in our cars. I've gotten out of a car and shocked myself so bad that it felt like someone pricked my finger with a needle!

And I did think that anti static foam was for static, not rfi, but hey, if it helps the sound and it's under $50, why not give it a try. In my oppinion, Elizabeth is one of the most respected philes around here and if it works for her I'm game for giving it a try.
Liz...Sorry, I thought the OP was talking about the "spray" type foam. That would be messy.
Post removed 
Post removed 
I've lived in Colorado since 1986 and in Wyoming before that. I have never had a "crazy amount of static"? Maybe your problem lies elsewhere. Just my .02 cents worth.

Maybe it's just me, but I sure the hell wouldn't be spraying foam inside my equipment. I can see the ad now... 9/10, Mint condition, perfect shape, well expect for the foam inside the unit :-)