41c0294b bc62 4d80 9db7 d01737e4c44c

pbnaudio

Responses from pbnaudio

Package Lost in US Customs
It can take a while - just be patient - it'll eventually show up - Ordered some tubes on March 7th they showed up last Friday.  Once I ordered 12 turntable Copper mats from Germany the took 14 weeks to get here all via DHL - its shipped in contain... 
Direct Drive vs. Idler Drive vs. Belt drive
I have both the DN 308 :-)  (actually I have several of them ) and a EMT 950 booth are excellent machines.https://pbnaudio.com/pbn-dn308/Good ListeningPeter 
Most Musical 6NS7 tube for a Preamp?
Try some old Red Base RCA 5692 - the very best 6SN7 there ever was. The go for about $100 on average https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F174260219898These are what your looking for  - just as an example... 
List of plinth builders for Technics SP10 MK3
lewmI posted a picture of the innards of the SP10mk2 on my systems page for referencehttps://systems.audiogon.com/systems/4923Good ListeningPeter 
List of plinth builders for Technics SP10 MK3
LewmThat's hard to do especially on the MK2 as all the circuit cards are installed on the plate and they plug together via sockets on them with no wiring harness.  Everything of course is possible but it would require quite a bit of engineering to... 
VAS (Steven Leung) cartridge repair/retipping service?
Steve at VAS is fantastic, he re-built a EMT Cartridge for me last year that another reputable cartridge servicing shop said was un repairable.  It's now back to its former glory.This year he rebuilt a Benz Glider for me - which was turned down by... 
List of plinth builders for Technics SP10 MK3
What exactly are you looking for ?  Can make almost anything - have done a few Technics Plinths https://pbnaudio.com/custom-turntables/ Take a look at my systems page too theres is a Technics pictured therehttps://systems.audiogon.com/systems/4923... 
Frustrated with Vinly
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F161402849405This and a 6L ultrasonic tub is the most cost effective way to properly clean records.  1 Gallon Distilled water is perfect fill level which cleans about ... 
What creates the effortlessness in sound reproduction?
This :-)https://pbnaudio.com/mr-777at/Good ListeningPeter 
Mounting Triplanar Tonearm to SME 20/2 Turntable
As others have suggested make a new armboard  a local machine shop should be able to help you.  Tri’s setup jig is a little “rough” when I mount Triplanar arms I use my DR Feikert jig on the tonearm directly then mark the hole locations on the bla... 
So many great golden era DD tables out there, what do you recommend for $1000?
I have posted these videos before - this shows the speed accuracy of the DP80 over an entire album side 17 minutes and 28 seconds.  The Timeline on the DP80 is about 26 feet away from the wall across the hall from my listening room, where the dot ... 
Need Help! My Class A Amp Is Running Very Hot
https://www.amazon.com/dp/B07R4W5DS7/ref=sspa_dk_detail_6?psc=1&pd_rd_i=B07R4W5DS7&pd_rd_w=G...=Get one of these - a properly designed Class amp should not run any hotter than 50 to 55 Degrees C  Good ListeningPeter 
So many great golden era DD tables out there, what do you recommend for $1000?
https://pbnaudio.com/pbn-dp80/ 
So many great golden era DD tables out there, what do you recommend for $1000?
The Denon DP80 is a stellar machine.Save a little longer and get a DP80 Good Listening Peter  
Accuphase DC 81
The Acuphase is a 2 channel DAC only working on 44/16 - therefore it will only work with rebook CD. AudioMaster ?  :-)Good ListeningPeter