pbnaudio
Responses from pbnaudio
... WHAT POWER CORD(S) ARE PLAYING IN YOU SYSTEM TODAY? https://www.amazon.com/C2G-Premium-Universal-IEC320C13-Compliant/dp/B00009OLLS/ref=sr_1_5?crid=9ZVGF...:-)Good ListeningPeter | |
Dunlavy resurrection? Just tried the contact pad on the site - goes straight through www.pbnaudio.comThank youPeter | |
Dunlavy resurrection? Twoloftears [email protected] you Peter | |
Anyone use auto lifters? Opinions Thrulift is an excellent lift it’s gentle and well thought out. On lighter tonearms like the Triplanar U12 it’s excellent. The original AudioTechnica 6061 is a little more coarse in its operation - on a heavier tonearm like the Kuzma 4P 14 it wor... | |
phono pre-amp being replaced Consider the Liberty B2B-1, and Yes I do make them :-)https://libertyaudio.com/service/b2b-1-all-fet-phono-preamplifier/Good ListeningPeter | |
Balanced vs RCA between amp/preamp Regarding ground connection being connected first and disconnected last IS true if one wire the balanced connections as perhaps intended. The shell which has the 4th terminal on a 3 prong XLR connector is intended for Chassis ground. XLR connect... | |
Why According to some Turntable extremists Pitch Control and Direct Drive is Sacrilege? The EMT 950 is a fantastic Turntable - I own one - among dozens of other tables, in use are only DD tables. As far as speed accuracy nothing really comes close to the EMT 950 - the Denon DP80 and the DN 308 perhaps. Heres a small video of the... | |
Top ten DD turntables of all time? @petg60Could not agree more :-)https://pbnaudio.com/pbn-dn308/Good ListeningPeter | |
Plinth ideas for DENON PD-80 DD turntable I use Royal Purple Synthetic lubricant for lubrication of the bearings.https://www.royalpurple.com/product/synfilm-recip-100-reciprocating-air-compressor-oil/Good ListeningPeter | |
Plinth ideas for DENON PD-80 DD turntable Your all welcomeClarification - the 50/60 Hz switch only function is to add capacitance to the motor capacitor nothing else. And all units are 100V so a step-down transformer is required for long term reliability. Good ListeningPeter | |
Plinth ideas for DENON PD-80 DD turntable chaksterThe bottom bearing "holding" plate comes off by removing 3 screws, so its pretty easy. I have added 3 photos on the Systems page for the DD tables. The last three ones https://systems.audiogon.com/systems/6431Good ListeningPeter | |
Plinth ideas for DENON PD-80 DD turntable Chakster - I use the Boston mat on my DP80 it works great.Another mat that needs investigating is the Acromat from funk firm.As far as using CU mats on the DP80 i don't think its a good idea they are too heavy for the spring suspended inner platt... | |
Plinth ideas for DENON PD-80 DD turntable I think your confusing the mater - the metal parts of the platter is dual coupled by leaf springs - the mat - the rubber thingy 🤣 has the label relief.The two metal platters are isolated by foam pads around their circumference by foam pads - 6 or ... | |
How come Horn + woofer designs are not more popular? Once you have listened to a properly designed Horn with a State of the art compression driver behind it - there is no way you can listen to a 1"dome tweeter again. :-)https://pbnaudio.com/m25-loudspeaker/Good ListeningPeter | |
Recommnedation for the BEST SOUNDING integrated amp up to $3500 https://www.usaudiomart.com/details/649524227-nad-m12-and-m22-state-of-the-art-components/Heres another option - and yes I’m the one selling them 🤣Good Listening Peter |