2. amps-preamps
  3. 1215125685

Amps on the cheap....real cheap

I have a pair of power hungry A-1 soundlabs. My original intent was to pick up a set of JC-1's or Atma MA-1 to drive them. That is still my intent but it won't happen for a year or so. In the mean time, I would like to find something to power them with. I have an old Adcom GFA 555 which I could utilize. This amp is bridgable to 600W mono. My thought was to pick up a second one, run them mono (current used price around $300.00) and live with it until I spend the money on better power.

Before I rush out and buy another used Adcom I thought I might get your thoughts on the best budget amps out there, either mono or single chassis, that would have the juice to get the A-1 moving.

I know this is a tall order on the cheap but I am sure there are a few great budget amps out there on the cheap that would hold me over.

I would like to stay under 6 or $700.00 for the amps.

Thanks in advance.
lance_s
15 responses Add your response
johnnyb53
3,510 posts
 
07-04-08: Grannyring
Buy two Applied Audio Research SLA 2 amps. They cost $250 new each. One would also be enough.
Now there's an SLA-4, which is 100w/channel x 4, so you could bi-amp at 100 watts per wire. These go for about $439. The really attractive thing about the SLA-4 mated to an electrostat is that the SLA-4 is rated to 2 ohms.

I think the funky and low loads that electrostatics sometimes present may be part of your problem.
philjolet's avatar
philjolet
2,305 posts
 
Sufentanil,

A few years back I saw a few of them in the $1000+ price range so presumed they could be had for less now but did not see any for sale here. Maybe it is because Innersound is out of business and people are holding on to them or none are being sold any more.
lance_s OP
27 posts
 
i will continue to keep a look out for a used esl 300 or sanders 300. I think that might be a great stop gap. I am currently upgrading the backing plates anyway so I have some time to look.

Thanks for all the ideas.
sufentanil's avatar
Ag insider logo xs@2x
sufentanil
782 posts
 
Philojet, if you find an Innersound ESL amp for less than $1000, then you should definitely jump on it. They tend to run in the $1200-$1500 range for the ESL 300. (I own one; it's a great amp.) You're right in that it's the perfect choice for electrostats.

For the price that the original poster supplied, though, I don't think the Innersound is in range.

Michael
Post removed 
lance_s OP
27 posts
 
How do you upgrade the adcom? Who might be qualified to do that and what would it cost?

I was trying to get the speakers up and running tonight, the right channel on the adcom was lighting up the distortion sensor on the front of the amp quite a bit earlier than the left and then it went dead. I believe that I lost the channel tonight so now might be a good time to either upgrade it or dump it...
Post removed 
lance_s OP
27 posts
 
Thanks for all the replies guys, I do like the esl idea, I have heard pretty good things about them. Carver too. Keep the ideas coming, I know there is a large group of people out there that are like me, looking for a stop gap, or newer younger people just trying to break into audio that think pioneer is the end all-be all (no offense pioneer owners). There are some great budget amps and processors out there on the cheap.
jig
160 posts
 
what Philijolet said. IMO, the Adcom has a somewhat grainy/grungy sound in comparison.
grannyring's avatar
grannyring
6,436 posts
 
Buy two Applied Audio Research SLA 2 amps. They cost $250 new each. One would also be enough.

These are studio amps and sound 85% as good as the best solid state amps one can buy. I know as I have owned SS amps like the JC1's, Belles Reference and others.

I know its hard to believe and most don't. See my feedback as I am no hack. Feel free to contact me for more info.

These litle amps are just so good.

Bill
philjolet's avatar
philjolet
2,305 posts
 
Sell the Adcom and buy a used Innersound ESL which is a very big step up and made to run ESL's. Less than $1000 used (I imagine) by now.
goldorak's avatar
goldorak
89 posts
 
I second the Carver option, I used to own an M4.0t 375 WPC to drive very power hungry Totem Mani-2s. They worked fine.
sufentanil's avatar
Ag insider logo xs@2x
sufentanil
782 posts
 
I would imagine that the Adcom would be the most cost-effective choice. Another thought would be to try one of the older Carver amps.

Michael
riley804
1,224 posts
 
Parasound, Proceed, B&K, Aragon, Rotel, Classe are ones that you could look into.
narrod
1,064 posts
 
Since it is a short term solution just buy another Adcom and minimize your expense.
Log in to respond
More to discover
80x80
Carver Crimson 275
80x80
VAC Signature 200 iQ
80x80
EMM Labs PRE