autospec
Responses from autospec
| VPI 78 RPM pulley for motor ?? Well here's what worked, I took a pulley off a 300 RPM motor, I put it on the 600 RPM motor , then I hooked it up the the VPI motor controller and fine tuned the speed with the motor controller..............Problem solved.......Thanks Elliott and ... | |
| VPI 78 RPM pulley for motor ?? Well I'm happy for Harry, being alive is very good........I just found out they were closed.........So I will call them later...........Will | |
| VPI 78 RPM pulley for motor ?? I talked with Steve at VAS and he knew nothing of the 78 pulley........W | |
| VPI 78 RPM pulley for motor ?? I talked with Steve at VAS and he knew nothing of the 78 pulley........W | |
| VPI 78 RPM pulley for motor ?? Elliott: Thank you for your worth-less input, try and put something into the system and maybe you will learn something.......I see after looking at some of your posts that you already know most every thing........So tell me how to get that pulle... | |
| VPI 78 RPM pulley for motor ?? First I didn't know Harry had passed, may he rest in piece.........It show's how long it has been............I remember dealing with him and his wife and it was a lot simpler then......Times have changed ?? When I call that number , the message s... | |
| VPI 78 RPM pulley for motor ?? Thanks for your input, but I find that VAS doesn't know about the pulley, and there's no way I know of to contact anyone at VPI ............They are the biggest joke in the industry.....14 pages of bad information, no phone numbers that work, all ... | |
| 40th Anniversary Pre Amp and Repair History First let me say this, George Meyer is not, let me say it one more time , is not a Authorized repair center, and they have screwed up more Audio Research than you would believe, I have had first hand experienced this , with 4 units destroyed by t... | |
| SONIC FRONTIERS DAC3 PROCESSORS SCHMATIC.......... Please don't suggest Sonic Frontiers, they are no help with this......W | |
| Which would be preferable, an older Audio Research Corp. VT130 or a newer SS Rotel 1552? The VT-130 is so much better amp than a Rotel, if you can't hear that difference you need hearing aids........The B&W speakers aren't much better......That amp will really sing with Wilson's, Klipsch, Pro-ac's , Sonus Farber........I have a VT... | |
| Audio Research burning holes in printed circuit boards ??? Yes sir you are right on that call, you don't want to leave the 6550 voltage regulator in too long or you will have that problem.....I'm going to work on it tomorrow and try and get to the bottom of the problem, Audio Research people are real good... | |
| E-bay went from the best warenty to the worst This guy would eat negative feed-back for lunch, he lied, he stole, and just about anything and even got around e-bay for a while......Sold the item twice and got the money.............It took ebay two weeks to get it figured out..................... | |
| FIRST WATT BIAS SETTING FOR F-5............Not turbo !!! Dekay: Thanks for your input but I have already been there, My amp I think is about the first version of about 5 different f-5 boards.............I have also contacted Nelson Pass and they are looking into it................So I thought that ma... | |
| Is Will Vincent still restoring amps? Onearmrog: This is one hatefuful person that somehow got really mixed up.....The truth is not in him, so I wouldn't give him the time of day...........What a sad thing............Will | |
| Altec 601 tweeter repair, Replace diaphragm Sir: You are a little behind the times, they have been sold to a firm in Mexico, never to repair Altec's again........It's the American way...........W |