2. analog
  3. 1157508919

How much fine tuning required on cartridge loading

I am getting more seriously into analog, and will be buying a new phono pre-amp to replace the Harman Kardon receiver I'm currently using as a phono stage. Some (like the EAR) have a simple MM/MC switch, others (like the Rhea) allow for fine adjustment of resistive and capacitive loading. I'm wondering how much better the sound can get if the loading is fine tuned, or if MM/MC is good enough. Cartridge is currently a hi-output MC (attracts a screwdriver to the body, can play loudly thru MM stage w/ pre turned up), I believe an old Benz - black body with a gold V on the front, with what looks like a figure 8 knot above it.
honest1
willster
66 posts
 
I've been playing with cartridge loading recently. I use a Sutherland Phd phono stage. I decided to experiment with the effect replacing the stock resistors might have. I'm now listening to my first attempt at this using Vishay resistors.

There is a surprising difference in the sound but I'm waiting until I've put a few more hours on these resistors to see if the sound changes as they settle in.
martykl
3,578 posts
 
I use a Rhea and the remote loading feature has proven extremely useful. Also, because the Rhea can accept multiple (3 max) inputs, note that it offers a measure of "future proofing". If your table allows multiple arm/cartridges Or if you add a table in the future, the Rhea will accomodate the change. OTOH, the unit has a specific characteristic sound vis a vis other phono sections I've had/heard and you'd have to be the final judge.

Good Luck,

Marty
raygunn
10 posts
 
From the description, it is quite possibly a Monster Cable Alpha 2 HO from the mid 1980's or so.
These were designed and built by ZYX.

DO you have a picture of the cartridge?
honest1 OP
586 posts
 
I could take a picture. Should I email it to you, or post it somewhere?
snake64
10 posts
 
@ Willster,

Please do share your findings with us.
I've just figured out the right loading with 'el cheapo' resistors for my Denon DL103 and am looking for some quality ones.
Vishay is on the shortlist.

Thanks and good luck.
More to discover