High Value Phono Stages

Rogue Ares II Magnum sounded really good because of the tubes. However I always wondered how Rogue compares with the Hegel H10?

Wspohn, I and the internet remember the Classe DR3 as a 25W Class A amplifier that was indeed excellent sounding, but how are you getting 500W out of it, even in bridged mode? As I recall it ran quite hot even producing 25W owing to Class A operating.

I had, briefly, a Ray Samuels Emmeline 2 box phono stage. I say 'briefly' as that was how I learned that Positive Feedback reviews did not always translate into real life for me.

Now I'm quite happy with my NuVista Vinyl, but I know that you, OP, were less impressed. So, horses for courses. Maybe a Ray Samuels will work for you!

^ The NuVista is a value for what it offers

Both the Hagerman and Graham Slee are from a Brand that also produces DIY designs. 

I see DIY is not broached upon in replies made. 

DIY offers options, that in some designs will most likely show the design is easily surpassing some of the Branded Models suggested

A particularvTom Evans Phon' Model, has been publicly scrutinised as a Model marketed at £25K. The same model is proven to be doable as a parts only BOM, using earlier known pricing, for close to £1K.

I would suggest approx' £1.5K if produced as a commission build.

My experiences are showing BOM's of £500 - £1K for a Phon' design to be DIY built are hit and miss, with a few encountered being able to impress.

Same Phon' designs are very easily surpassed in End Sound performance when the BOM for the design are approaching £2K and over. 

My experiences had, of a small cross section of the commercially available Branded Phon's offered to market. Where prices come in at under £5K retail, have some very wanting models in the mix, with a few only that contend with a more expensive commercially available model. 

In a different context, I have experienced DIY designs at close  to £2.5K as the BOM, that have been toe to toe as a competitor to commercially produced £10K + models.