@cakids - I found some different information,,,
From the table of Conductivity...
BTW - Conductivity is VERY important for contacts
Also - If the contacts of a plug are Gold or Rhodium plated, then a substrate plating is required, which normally has an even lower conductivity rating than the plating materials.
Regards
White gold was originally developed to imitate platinum (a naturally white metal). White gold is usually an alloy containing about 75% gold and about 25% nickel and zinc. If stamped 18 karat, it would be 75% pure gold.and
Rhodium is a chemical element with the symbol Rh and atomic number 45. It is an ultra-rare, silvery-white, hard, corrosion-resistant, and chemically inertBut you are correct in that Rhodium is used a lot in jewelry, but in comparison to silver, coper and even gold - it is a poor conductor
From the table of Conductivity...
- Silver’s conductivity is 106,
- OCC copper is around 102
- Copper is considered the reference at 100
- Gold is 65
- Rhodium is 38
- Beryllium Copper is 22 (commonly used for plug contacts)
- Platinum is 15
BTW - Conductivity is VERY important for contacts
Also - If the contacts of a plug are Gold or Rhodium plated, then a substrate plating is required, which normally has an even lower conductivity rating than the plating materials.
Regards

