2. home-theater
  3. 1357691872

B&K Ref. 30 Problem

I mistakenly posted this under Misc. as a Ref. 20 problem so I'm re-posting under Home Theater.

I recently purchased this processor to replace a Lexicon processor that died. It may be an interim step while I decide if I want to invest in a new processor with HDMI. I do not run a center channel and have the B&K setup for 2 front and 2 surround. My problem is that I’m unable to get center channel information through the front L&R speakers using the digital outputs from either my Fios box or BD player. My BD has 5.1 out so I setup the B&K that way playing movies and center channel information comes through loud and clear. My Fios box does not have 5.1 so I’m forced to use the audio digital outs. Video for both Fios and BD is through HDMI direct to the TV. I never had a problem setting up a phantom center with my other processor(s) and did not change any settings on the Fios box or BD digital outs while setting up the B&K, so it appears to be something in the B&K.

Can anyone suggest a troubleshooting procedure or a particular setting for the B&K to correct the problem?
128x128marco1
loomisjohnson
1,905 posts
 
i think what you're getting in surround mode isn't center info, but the portion of the dialogue that gets normally summed to the L/R in the course of digital processing--the fact that it's much louder during the commercials is attributable to the fact that volume during commercials is normally amped up to obnoxiously deafening levels.
ergo, the b&k's processor is deranged--i wouldn't invest in fixing it, since it's easy to find a new (used) unit for a couple hundo. it does sound like you could connect with just rca and still use surround mode. sorry i couldn't be more helpful.
imhififan's avatar
imhififan
2,123 posts
 
Marco1, Have you set the Favorite Speakers to 4 (page 40 of the Owner’s Manual)?
marco1's avatar
marco1 OP
496 posts
 
Imhififan, yes I have.

Thanks again Loomis.
More to discover