Second Tone Arm

There looks like the plinth has room in the back for an additional arm. I just don't want to drill a large mounting hole thru the entire plinth. Are there arm that just screw into the top?

You don't have to drill for a VPI arm....

You will need an armpod to put next to the TT and 12" tonearm because of the increased distance to the spindle. I ordered both by the Reed (www.reed.lt) for my Kuzma Stabi Reference. But to enjoy both arms you will also need an phono-pre with two separate inputs for both arms.

RS Laboratory RS-A1 which is sonically above its current price point(WAY above the original $500 list) in my opinion if you can cope with its idiosyncratic handling characteristics. Always been a bit curious about ViV Laboratory Rigid Float arms. Both of these require no drilling. They just sit on your plinth. Once placed I used two sided tape to further secure its position due to the bulky tonearm cable utilized.

The ViV looks nice, but at $4k+, it's out of my range. I'll check out the RS- A1 and some VPIs.