Basis 2500, 2800 or Debut - which would you use?

I agree with Syntax. All of the Basis tables are extremely well-engineered and built to very tight tolerances, so you really can't go wrong with any of the choices. The Debut's suspension system probably gives it a slight advantage over the 2500 and 2800 in terms of isolation, but I would strongly urge that you get the vacuum system with it. I've got an Ovation that I upgraded with the Debut's platter, bearing and vacuum system, it has worked flawlessly since I got it in 1991, it truly conveys the music and the vacuum is a revelation in flattening warped records. Only point where I might question Syntax is the arm choice. I have a Graham Phantom Supreme arm, which I like a lot, but I'm not so sure whether I would not trade that for the latest Vector if given the chance.

Pops, Are you sure the Basis 2200 is "impervious to mechanical or
airborn vibration?" I believe Syntax had his Basis on a Vibraplane and
noticed an improvement from the added isolation. I have my SME 30/12 and
motor controller on a Vibraplane and also noticed an improvement.

I did recently hear a Basis Debut with a Vector arm and Clearaudio Goldfinger
cartridge in a super Spectral/MIT/Magico Q7 system and the sound was very
natural and enjoyable. I really liked the build quality and vacuum system on
the Basis.

....But I would buy it with a Phantom Arm instead of the Vector.
Syntax

hello Syntax, could you please explain why you would prefer the Graham Phantom arm over the Basis Vector arm? I would like to understand your reasoning. Thank you.

Peterayer, I have had my 2200 on two surfaces, first, a maple butcher block on top of a target stand and now on top of an Arcici stand with air bladder technology. I cannot say I noticed a difference with the TT however, my electronics are better isolated on the floating shelves underneath and I have noticed a slight improvement.

When the 2200 was on the butcher block you could bang on the BBwith no audible or physical effect. So IMO, the resonate annihilators used for suspension on the 2200 is all I need for isolation.

BTW, you must have heard that system at Goodwins, heard it a few weeks also, quite nice!

Yes, I did hear it at Goodwins. I was shopping for cables and was treated to their big room with my LPs. It was very memorable.

I could also tap on my stand under my SME table with no audible effect, but the sound did improve when I put the 150 lb Vibraplane plus a 130lb piece of steel ballast under my table. It was like jumping up to a higher lever cartridge with the added low level resolution from the improved isolation.

I admit I have no experience with your 2200. Seems like a nice table. I like the looks of your room. I'm sure a dedicated sound room would do wonders for my system.