AQ PT-9 vs. Rb250-300


I am setting up a 2nd system using a HW19. I am looking for a reasonable arm. I can get a new PT-9 for price $375. The PT-9 has Litz wire, adj. VTA., damping trough. Anyone know how good an arm it is vs. the Rega's? The other adv. is I have extra tonearm cables I can use as well.
gerardff
I had both a PT6 and a RB300. I preferred the PT6 in every way. Although the RB300 has more upgrade options which I think is why it's more popular. I think the PT9 is a newer spec, and imagine maybe an improvement over the PT6.
..The Rega is a better arm if and only if the modifications are made... dropped counterweight especially.
What did you you like about it regarding the sound differences?
I didn't notice a material difference in sound - both are pretty neutral. The Rega arm is harder to set up (VTA is a royal pain unless you spring for the VTAF), harder to adjust (hard to set VTF accurately, and the cuing mechanism is stiff/not very adjustable). I had it mounted on a Pink Triangle table which probably was a poor match in the first place.

As Stringreen points out - if you mod the Rega it can be better, and there are more/better mods available. VTAF, and the Michel counterweight go along way to mitigate the setup issues, and make excellent sonic improvements. The only thing is, once you spend the $s for those mods and re-wiring, there are other arms to consider.

I don't want to sound like I'm bashing the Rega arm. It's a very popular arm. My observations are probably personal preference. I was satisfied with my RB300, and when I sold it, it took about 2 hours for a buyer to show up. You can't go wrong with one
There is a caution regarding the Rega arms. When fitted with a heavy non-Rega counterweight, I've seen some bearing failures. The bearings are not super quality (price point) and don't like to take a beating. When looking for a Rega, carefully check that there is no binding in its movements.