Phono Stage - Gold Note PH -10 & PSU 10 power supply ? or comparable

thanks all. Getting ARC REF 6se pre amp

It’s line stage only. Been using ARC Sp20

koestu rosewood signature , .40 mv output cartridge 

have phono set at 200 now Will look at ARC ref 2se phono

aS well as strongly consider PH10 w/psu

wondering if Gold Note is coming with a PH10.2

since it’s been out awhile and now there’s the 5.2..

Ref phono does quite well with .4 mv carts including my Kuzma CAR-40 and Koetsu  Urishi Black the overall gain structure of the system is and should be 

its all ARC Ref series out to high eighties db Tidal Piano. I’ve run carts w right at .2 and that is sketchy but I’ve got a couple of nice SUT.

congrats to OP the 6se is imo a superb line stage. Have fun !!!!

I should mention I used the Goldnote with a .3mv Dynavector 17D3 and it was fantastic for $$$. 

@lewm my phono stage is very quiet - no issues with higher gain. 
in my experience though, with all the phono stages I owned, the higher gain is going to result in a more forward sound and a loss of a soundstage depth. 
The overall sensitivity of preamp or integrated amp matters but higher gain always sounds more artificial to me and not as relaxed. it is never a volume position on the preamp or integrated amp that matters, but the phono stage gain. 
Phono stages I tried this with are Sutherland 20/20 Mk2 and my current Whest Two.2. Cartridge was in both cases Hana ML with 0.4mv output.
Same result, with different downstream components. 
I’m w big fan of ARC gear and would love to try that ARC though. Will need to figure out a way.

I sold my PH-10 & PSU-10 after buying a $650 Softone Model 4 on a whim to pair with my MSL Platinum. It wasn’t a close contest,

Running NOS Mullard’s but also got great results with RCA triple micas.

its not pretty but the mute button is great and its as quiet as the GoldNote.