1. Home
  2. speakers
  3. 197464-148846

Subwoofers for Magnepan 1.7 + Bonus positioning question

I have a Hegel H400 pushing my happy Magnepan 1.7s and am thinking about adding either a single or pair of subwoofers that complement the Maggies. I currently have a 30+ year old Yamaha YST SW-160 that sorta does the trick. I'd love to have a sub that came with a phone app for tweaking the settings. It's always a pain, jumping back and forth from the sub to my listening spot until I get it right.

Positioning question: Would it make sense to stack the 1.7s on top of the subs where they currently are? (Assuming it would be physically possible) Sounds good on paper anyway.

baconboy
soix
11,238 posts
 

These SVS SB1000 Pro subs are $1140 for a pair, get down to 20Hz., and come with an app so you can fine tune the subs from your listening chair.  They also offer a 45-day, risk-free trial including return shipping and excellent customer support if you need any help.  Best of luck. 

https://www.svsound.com/products/sb-1000-pro-subwoofer

rocray's avatar
rocray
1,542 posts
 

I have found SVS to be a great value. Are there better? There is always better. However I don’t think you can find better for the price. The app is awesome.  I have a pair of 3000 Micro in my dedicated listening room,and a pair of SB 2000 pros in my secondary room.  They are so easy to adjust,even I can do it. And that’s saying something! 

thriftyaudio's avatar
thriftyaudio
190 posts
 

I utilize the SVS 1000 for the HT. Very nice solution.

For my main music system the Rythmic F12SE (dual) is amazing. 

Many years ago I stacked bookshelf speakers on subs. Only after I compared the sound of stacked versus dedicated stands did I make the decision to keep the subs and speakers separate. YMMV

Enjoy the music!

 

jjss49's avatar
jjss49
6,926 posts
 

op

you did not talk about your room (it matters a lot when it comes to deploying sub(s))

general advice is get a pair of rel's (t7, t9 series), use the high level inputs (follow rel's instructions meticulously for setup)

subs on the floor, alongside each 1.7 panel

gdaddy1
513 posts
 

@soix   +1

The advantage of stacking them is the physics involved. When done properly you get a +6db increase in output. That's a lot!  This allows for a decrease in gain level and renders lower distortion in the process.

Another stacked option is to set the bottom sub @ a low crossover around 40hz and then set the top sub higher around 70hz. This fills in a wider range of low to mid bass.

Tight, punchy and rich sounding throughout the entire bass region. 

More to discover