Recommendations for custom amp stands?

@tomic601 @ervikingo 

When I built my sand boxes, pictured above, I simply bought dry "Play Sand" at Home Depot.  $10 per 50 lb bag.  Needed three.  Do they make any difference?  My ears aren't that golden, but the concept of sand for vibration isolation is well documented and I wanted the amps off the floor.  So I'll assume there is a benefit, whether I hear it or not, like so many tweaks in this hobby.  At least this one is affordable and serves a purpose.  Cheers.

Either Mapleshade, or build your own. I have both, the later I got custom wood butcher blocks made on Etsy and finished them myself. 

@bigtwin I forgot I have some sand boxes I bought a decade or so ago.  Let me go look for them an d check the dimensions.  Great job BTW, they look great!

Seismic amp stands and Nordost Sort Fut & Sort Kones... great electronics should get the best available isolation platforms & footers. Find them pre-owned as they are crazy expensive otherwise. There's no better iso systems available, in my humble opinion.

@ervikingo  The beauty here is you can make the stands to the exact size you require.  I used 1 sheet of 3/4" MDF, 1 quart of gloss paint, spikes I ordered from Amazon and 3 bags of sand.  Tools required are a straight edge (homemade), a skill-saw, some carpenter's glue and a handful of finishing nails. A bit on hole filler and some sandpaper.  The entire project was completed over a weekend.  The total cost was under $100.  Satisfaction - Priceless.  🤣