VPI Signature 21 Lubricate

Big thanks to all for great replies!

Antinn, this kit is wonderful, thanks a lot!

Any Thread that puts the notion out there that a lubricant being used on a Bearing is worthwhile as a Practice gets my vote 👌

Long time VPI owner. For inverted bearing I use Phil Wood lithium grease (made for bicycles) and no issues. A little dab on bearing ball and good to go. I lubricate the bearing and motor once a year. I still have some of the motor oil that came with my VPI SAMA in a syringe. If still not sure email VPI.  

I owned a TNT 3 for many years and used 30 weight motor oil which VPI approved. In my new VPI Prime Signature 21, I used 30 weight synthetic motor oil and VPI said that's good.

Part of the reason I buy VPI is because they are so well made I don't need to worry a lot. But I'm not a guy who would pull apart my turntable, which sounds like fun, but i'm getting a bit old for that.

Once my roof leaked during a rain right on top of my TNT 3. In that case, I sent it back to VPI. When they sent it back to me, they told me to oil the turntable with 30 weight motor oil. One can will last many lifetimes.

I used to have the JMW Memorial 12" uni-pivot arm. They told me to use a lighter oil on that, but I purchased my new turntable with the gimbal arm, so no more worries about that, I think. Unless the gimbal arm needs oiling. I haven't thought of that until now. I'll contact VPI.

Only problem for me using motor oil is you're stuck with a quart of oil after using a few drops for lube.