Eminent Technology LFT 7 !!

My LFT6W bass panels have arrived.  Unfortunately one did not fair well in transit.

The wide frame rail on one speaker is bent and curved inward. Good news is the three bass panel drivers are unharmed.  I have separated the rail from the drivers and will have my local metal shop straighten it.  At least that is the plan.  

Hope to have the LFT6W bass panels and LFT6 main panels making music as one before the end of the month.  LFT6 plus LFT6W equals LFT7.

Congratulatios @riverdinaudio! And condolences on the bent frame. My pair of LFT-4's were shipped together in a single carton (quite heavy), but each speaker was VERY well ensconced in many layers of bubble wrap, and both arrived undamaged..Unlike the LFT-8 (and the LFT-6, correct?), the LFT-4 has a solid oak baffle with an empty space in the middle, into which the LFT driver's metal frame is installed.

I look forward to reading about your LFT-6 + LFT-6W combo. Might pics be possible?

Not sure how to post photos to body of forum.  I changed my post photo from the LFT3 to my LFT7.  Oak trim left side is the LFT6W bass panel.  Right side in black trim is the LFT6 full range.  

I plan to experiment with using the LFT6W bass panel in place of the eight inch bass driver in one of my LFT8 speakers.  

Frame rail has been reshaped and reinstalled.  Not perfect but acceptable. Will finally hear these later this evening.  

So this will be the size of the LFT-6 approximately?  Do we have an estimate of cost?  TY