Lyra and OMA

I did check with Aric. He recommended of 1:10 winding and did not see any detriment to do what I have planned, from the SUT perspective anyway. 
also: FROM ARIC: Hi Michael, My MM phono stage does not use any capacitors at the input so there’s no worries regarding connection of SUTs.

sumiko/project looks very similar to the Kleos, but I suspect the quality is not nearly the same.

 @jcarr are we speaking to compliance resonance issues for my arm and the Lyra?

KLEOS Dynamic compliance: 12 x 10-6 cm/dyn (@100 Hz?) at 8.8 gm

SUMIKO Songbird low MC is a cartridge often shown with my TT.

12×10-6cm/dyn @ 100Hz  at 8.5 gm  and it’s about $1000 less and cost

Both of these cartridge/arm combinations resonate at ~11 Hz.  (that’s high no doubt)I can do the hard math, but I haven’t yet and doubt it will make any difference to that aspect
Please tell me what I missing. Before I make a mistake. I know just enough to get myself in trouble. I’m chasing this because of the dynamic range of the cartridges’ is vastly different at the low end. I listen to classical music and rock.
Bent

excuse me. The extended range at the low end.
 

@michaellent  : Only take in count that the calculators in the net for the tonearm/cartridge frequency resonance takes the compliance at 10hz not 100hz. So, the Kleos has a compliance around 19 cu.

Btw, I own the Kleos and never heard the Songbird ( I owned 6 years ago the top of the line Sumiko. ) and I can tell you that the Kleos is an excellent quality performer.

Regards and enjoy the MUSIC NOT DISTORTIONS,

R.

There are calculators and there is experience. Maybe JCarr knows a little ;)

Tonearm has a lot to do do with how much you get out of your cart...