Cable brands that work well with Cardas?

@marco1 yep, and the factoid results may vary for others, yet one thing I tried a few years back was to send in two pairs of the older Cardas Golden Cross 1M RCA interconnects and had the soldered-on connectors removed, and re-terminated with the new no-solder crimped-on connector ends. It did sound a tad more transparent to me. Tried this setup with tube amps for a while before selling those two pairs.

Next, same as you, me also moving to the more recent Clear line of different cables. I’ve been comparing all-Cardas Grade-1 Ultra cables to all-Analysis Plus Crystal OCC, and intermixing them too for fun. Good results in all cases. What was unexpected and surprising is how good intermixing them sounds. Also very nice.

@decooney 

Coincidentally I used AP Solo Crystal before I got into Cardas.  Still have several pairs in my closet.  I'll give  intermixing a try too and see what happens 🤔

@marco1 cool, thanks for giving it a try.  Fwiw, my conclusion is I like the AP/Crystals more downstream in the system than upstream at the source where I place the Cardas.  As you may recall, when you pull those out [uncoil them] and put them in place they seem to take that same period to rest/play in place before they settle back in. Have fun testing if you do. 

I had all Cardas (mostly Parsec, some Golden Presence) and found that the Parsec speaker cables were holding back some much needed bass. So I tried some massive Clear Reflection cables which had awesome bass but unexpectedly set off my hot tweeters (Parsec is good at taming that). So I returned them to the dealer and ended up with Transparent Ultra which did not have that problem and also great bass.  So I would say Transparent is a great match!

Unfortunately they are just as pricey as the Clear Reflection, but you could call around - sometimes the factory has deals on previous gen models or trade-ins. You might actually prefer the cheaper Super to the Ultra.

Now I'm thinking of upgrading one of the Parsec IC to big old Cardas (not Clear) or Transparent.  I found out that I don't like any of the Clear line, not even the Cygnus phono cable.

@dr3 Clear Reflection cables which had awesome bass but unexpectedly set off my hot tweeters (Parsec is good at taming that). ...Now I’m thinking of upgrading one of the Parsec IC to big old Cardas (not Clear) or Transparent.

Another angle to consider, there may be a few other things to look into as well. 

Having owned Clear Ref, Parsec, and the "big old Cardas" you mention, and including all of the versions in the older Golden series, Cross, all laid back. And, some of the newer Clear, Ref & Cygnus too. Your mention of "set off my hot tweeters" is interesting. May be a key indicator. The reason I mention this is the Parsec and Clear Ref are moderately laid back cables to begin with, already capable of some taming. Clear Ref is a hybrid of old/new designs. Very quiet, and not overly neutral or not known for being overly bright or anything.

A few questions if I may:

• What is your source being used to feed the Cardas Clear digital cable now?
• Are you using an intneral or separate DAC with your source above?
• What preamplifier and amplifier(s) are you using now?

Your existing cables might work fine, just wondering if something upstream is causing those "hot tweeters" you mention to get fired up a bit too much :)