2. tech-talk
  3. 177660-4741

Can moving wire location at circuit breaker reduce hum?

The power line going into my music room will oftentimes make the amps’ transformers hum.  I’ve tried many things but have had no luck.  If I take any component that’s humming into a different room run on a different circuit breaker, the hum disappears.

Would swapping out the wires that go into the two separate rooms at the breaker make any difference?  Or is it more likely that one of the outlets on the circuit that goes into my music room is somehow miswired and is causing the hum?  I can unplug everything from the circuit except for my amp and it still hums.

Any suggestions on what I might be able to do short of hiring someone to run a dedicated line?

Thanks,

Mamoru

 

128x128audiodwebe
yogiboy's avatar
yogiboy
5,482 posts
 

"Would swapping out the wires that go into the two separate rooms at the breaker make any difference?"

Give it a shot, you have nothing to lose!

Post removed 
rodman99999
6,005 posts
 

     A lot of pro (instrument) amps have phase-reverse switches, to deal with hum issues, on stage.

     Those suggestions on the outlet wiring tester, to me, would be a good/basic place to start.

     Hots of all outlets in the room, on the same leg, in the panel/breaker box?

                                                    My 2 cents.

 

theaudiotweak
2,772 posts
 

Ground loop you have..Tom

theaudiotweak
2,772 posts
 

Thinking back over 25 years ago I had a client with top of the line Melos gear. Had the same hum issue and voltage on a line it turned out to be a coax cable hooked to a piece of gear connected to the preamp. Tom

More to discover