Grounding cable gauge size

Ozzy,

Interesting observation on cable length , I have a lot of different lengths and notice no change and with my amp, I have both the binding post grounded to separate boxes as will has rca to its own box and I hear zero noise from my speakers.

I am using tube mono blocks, which with tubes, generally have some sort of low-level noise. But as I stated I could tell even that noise to dissipate. I am pretty much now using 16 gauge solid .999 silver and have been happy with the results. But I do have some heavier gauge (12ga) running from my amps. I also have one length of Entreq Atlantis cable, that was the reason I started this thread. I still can’t understand why it is so expensive.

And, in addition to my Entreq Silver Tellus and my large DIY box I also have a couple of smaller DIY boxes that I use at my negative speaker terminals.

ozzy

Thank you and I respect your opinion, but I consider it just your opinion and not actual experience.

Its engineering. FWIW I did a survey about this topic a few years ago. What I found was that there were grounding problems in every system where the box was shown to be an improvement. To back this up in at least one of the manuals of one of the ground box product, the manual states exactly what I said- that if all the equipment has a proper grounding scheme internally, there will be no benefit.

Usually an Ohmmeter is all that's needed to sort this question out.

Ok, but my ears can hear the improvement and my brain can appreciate it. If it can't be measured it must not be?  It reminds me of the age-old topic of power cords not making a difference.

ozzy

Ralph is giving you a hint to fix the grounding issues at the source vs a series of relatively expensive band aids. Just my opinion, but i have ears, experience and a DMM. On the digital side, immaculate grounds and a Faraday cage will also be a big help.

Jim