Purchased a dual from the 5 and dime with the same blown fuse issue. However, this dual would not spin after fuse replacement. The strobe light illuminated. Dissected it and found 2 caps on the power/speed supply. Replaced the small one first. Nada. Replaced the big one second. Bingo. Regarding yours, maybe remove the belt and see how long the motor will spin before blowing the fuse? If the fuses does not blow, maybe a bearing issue?
Dual 701 pops fuse.
I recently bought a Dual 701 TT. Cleaned up nice but the T125mA fuse on the power supply board was blown. Put another higher rated fuse to see if it ran, yes it does. Put in a 500mA I had and played for a little while and it popped. So is the .047uF cap the culprit or could the EDS1000 motor be drawing more current than it should. I am not a techie, please keep it simple. Thanks.
- ...
- 12 posts total
- 12 posts total