You can use this Schiit SYS to match the output level on both amps!!
https://www.schiit.com/products/sys
https://www.schiit.com/products/sys
Missed Connections
You can use this Schiit SYS to match the output level on both amps!! https://www.schiit.com/products/sys |
Before you do anything else ( if you have not done it yet ), you should determine which " amplifier " you prefer driving the B&Ws. I find both amplifiers to have different characteristics ( personalities ), that might not gel when you use both amplifiers biamping ( gain matched of course ). If you find the Sunfire as good as the Hint 6, I would use all of the channels of the Sunfire, to biamp the B&Ws, the 5th channel for you center, and the power section from the Hint 6 for your rears. That would be my optimum set up, as my ears believe in biamping ( except in cases where you horizontally biamp, with the upper amplification being a different sound than the lower amplification, possibly breaking up the coherence of the speakers ). Get 2 good subwoofers as well, if you do not have them now. Enjoy ! |
@mrdecibel Hey, there's some things to think about. I just received within the last month the Parasound, the B&W's and two REL t7i's. Still trying to dial in the RELs but getting there. I think I will probably stick to using the Parasound integrated to drive my mains as it has HT bypass so I can cut out the receiver completely when I am listening to music. Enjoying everything so far! |