I can prove your room is bad


So you want to upgrade?  You want to know what the next big thing is you can do for a better sounding experience?

Try this.  Pull up a chair 2' in front of your speakers.  If you can't move the speakers, put it up to just 1, and listen for yourself.

The difference between what you hear sitting in front of the speaker like this, and what you hear at your normal location is all in the speaker dispersion and room acoustics. If you feel mesmerized, entranced, and wowed by your speaker at 2' but not 8' you really should consider improving the room, and if you can't, consider getting speakers with alternative room coupling, like ESL's, line arrays, bi-polars, etc.

That is all,


Erik
erik_squires
I rekindled my hobby.  I first of all got it all hooked up.  A buzz in the preamp.  Got rid of it.  Bought a new amp.  Plugged my new streamer right into it.  Walla!  It worked.  Then bought new speakers.  Oh what a chore to set up.  Large Crites speakers like Cornwalls.  I have always had subs.  Run in stereo from an amp.  New wires and cords.  I was lucky every step made an improvement in sound.  My room is about a foot from being the Golden Rule room.  Then I ordered 6 first reflection panels , two bass traps and 3 diffusion panels.  And this was one of my biggest improvements.  I am in a good place now!
humans are designed, from the ground up, to have the space intrude on and integrate with the sound source.

It’s the native environment of the human hearing system, in situ.

The question... is...: to what level, should that environment intrude and integrate. To what level is the intrusion found or felt to be best - for an audio set up, for the individual/group involved?
The advice of the OP is good, as long as you don't take into consideration the preferences of other audiophiles.  :(

mijostyn, you are incorrect in your statement that Sound Lab is the only line source dipole. I reviewed for Dagogo.com two models of the Kingsound King line (the original and King III). Both are what I termed, LSESL, or "Line Source ESL," with an array of ESL panels. Quad also uses a concentric series of ESL drivers, I believe. 

Technically, the Sound Lab is not an array, per se, but Roger at Sound Lab took pains to explain that the driver is a single sheet with a dampening system. When I reviewed the Sound Lab Ultimate 545 (at the time called the U4iA) for Dagogo.com, this was reinforced by Sound Lab several times such that I would get it correct for the article. 

Has the technology of Sound Lab changed since then? Are some other models different? I do not know. I am not interested in arguing the point, however.  

The use of an array for ESL does seem to be rare, but, imo is tremendously satisfying form of panel sound.  :)
@douglas_shroeder

I’m not sure your point, Doug. My post inherently allows for personal preference. Up close, do you hear a better speaker (to you) than you do sitting down.

As I think you are getting to, ESL’s are going to pass more easily here. :)
Dipole the sides are 180 degrees out of phase.
You would need to invert the phase then.