The System Percentages Thread


Purpose of this thread is for folks to post where each sub-category of 2 ch music systems they’ve built falls as a percentage of total system msrp. There will be no absolute rights or wrongs, but if a critical mass of postings are achieved, it will give new system builders a reference point of various breakdowns that have worked for A’goners.

I’m probably different than most, in that after a 20 year dormancy (since an NAD/B&W system in 2000), I jumped into the deep end and put together four complete separate systems in the last 18 months. By contrast, most I assume evolve their system(s) over time, picking up a new piece here or there to replace an existing piece.

Both approaches are welcome here, although I thought maybe since I approached each system from scratch with different budget, and planned (sometimes meticulously, sometimes very haphazardly) out the subcategories that way, that it might make for an interesting thread. Plus I’m a numbers guy so this stuff is really interesting to me (and most of all I'm bored with the virus shutdown!!). When I got done and calculated the actual percentages for each, I was surprised by the variance.

I’m sure there’ll be some back and forth about what the best ratio is, and likely that it’ll vary depending on budget, but let’s keep it civil. We all know there are no absolutes in audio, and what works great for one won’t work for another, and vice versa.

For budget I list msrp, even though much of my stuff was acquired used or demo, or at much reduced sale prices. But msrp provides a fixed reference, if nothing else. Feel free to omit budget if you prefer, but I think it adds context regarding differences in %’s across systems.

Feel free to add additional categories than those I have (my systems are simpler than many here I’m sure). Demerits if your percentages fail to add to 100%, haha. Okay to add more details like make/model, but mainly interested in system percentage breakdown. Get those calculators fired up!!

Anyway, here are my four entries:

Reference System ($20-25k msrp):
Speakers: 46% (L,R, and sub)
Amp: 27% (integrated)
Source: 9% (streamer/dac)
Power Conditioner: 5%
Cables: 13%

Secondary System ($10-15k msrp):
Speakers: 42% (L, R, and sub)
Amp: 32% (power amp)
Source: 15% (streamer/dac)
Power Conditioner: 3%
Cables: 8%

Office System ($1-5k msrp):
Speakers: 65% (L, R, and sub)
Amp and Source: 25% (super integrated, all-in-one with streamer)
Power Conditioner: 4%
Cables: 6%

Portable System ($0-1k msrp):
Speakers: 15% (L, R)
Amp and Source: 80% (super integrated, all-in-one with streamer)
Power Conditioner: 1% (surge suppressor)
Cables: 4%

kren0006
ebm's cut and paste response - love it, I chuckle every time!  but why did it take so long?
Generally speaking, over the years, even when I had Rogers LS35a and Quad ‘57 and Fulton floor-standers and Super Duper all tube electronics, much less today with a Sony Walkman portable battery-powered CD headphone system, I’d opine my system represented 30% of the total cost and tweaks the remaining 70%. Today, the percentages are almost certainly 5% system and 95% tweaks. Is that wrong?

A system             List 69K     Cost 38K

                             

Integrated Amp    9.1%         13.8%

CD/Streamer     16.9 %         23.5%

Power Cond       11.8%           8.1%

Cabling               15%             20.9%

Speakers/sub    47.2%          32.6%




B system        List 15.1K       Cost 12.1K


Integrated Amp 27.8%              34.7%

CD                      9.9 %             12.4%

Power Cond     18.6%               13.2%

Cabling             18.8%                25.8%

Speakers/sub   23.8%               14.9%


Interesting to do but conclusive of nothing to me. I got what got. (Room treatments should be included but my wife and I differ.)  I needed a speaker cable run of 32 feet for one speaker in "A"system. (Both systems have the same PrimaLuna HP amp.) The "B" system amp is stock and "A" system amp has different tubes. No gear in "A"system was purchased used. Like many.....I know a guy. Speakers and power conditioner in "B" system were used. (I first used supplied cabling/connects on the "B" system and replaced with better ones.) Components of the "B" system came from "'A"

I have poor power and top Power Conditioners wanted/needed With this hobby want and need get very confused. That's my best con-clusion.




I am just getting started on this journey.  So, I don’t have much money invested to this point.  My strategy is to prioritize things, so that the money I do spend produces the most results.

For things I don’t prioritize:  Radio and, so far, phonograph. And tape not at all.  I listen to radio in the car or while working in the garage and yard — serious listening, not so much.  But I wanted the option, so I found a 40 year old Fisher tuner on Craigslist that the guy wanted $20 for.  When I got there, the tuner stopped going into stereo, so the guy gave it to me free.  I fiddled with it and got it working OK.  Phono:  I paid $280 for a Denon DP-300f with free upgrade to Ortofon 2M Red cart.  Another $140 or so on record washer, album sleeves, protractor and cart alignment chart and stylus TF scale..

Priorities:  Bought 2 Martin Logan 60XT towers for $2200.  Bought used Parasound A21 amp and used Parasound P5 pre-amp for $2100.  Bought Bluesound Vault 2i for $1300.  

Not Unimportant but not sweating:  Cables and surge protection.  Bought a Furman for about $90 and was gifted another Furman that cost about $55.  Tower cables around $50.  Sub cables around $85. XLR cables to connect amp and pre-amp around $35.  I figured that the effects of connections would be more crucial in higher-end set-ups than in my modest system.  So:

Speakers:        35%
Amp/Pre:         33%
Sources:          27%
Cables/Surge.   5%