Phonostage for Rega P10

I guess I’m looking to level up with a phonostage and was thinking about the Allnic. I’ve owned an Allnic Linestage dht5000 and was happy with it.

And perhaps I should live with the Ares. Just looking at all points here and thanks for the responses.

I have a Rega P10 with the "matching" Alpheta 3 cartridge.
I have a warmish sounding system using the Usher Tower XL’s and a BMC S1 amp as well as a Nord Icepower class D amp. Current TT is a VPI Scoutmaster that’s making way for the Rega. A Lindemann Musicbook DSD 25 as well, FWIW.

I have also been using the all tubed NVO and it is the only piece I'd never change.  It replaced my Kondo M-7 and I have never felt the need to change it.

These NVO guys coming out are making my "buy now" finger twitchy

Been super happy with the Parasound JC3 with my RP10 - went through a bunch of cheaper Phono stages and it was real easy to settle on the Parasound once putting it in line.

I'm sure it's not the be all end all but it's a fantastic piece of gear all the same - nice and quiet, smooth and dynamic definitely a winner.

I've run a Lyra Delos, Denon DLA100 and an Apheta 2 all of which worked well.

The JC3+ apparently has more flexibility but the overall character is said to be the same I think.

Then you’d better post Apheta 3 specs, i can’t see even the Output of that cartridge on their site, anyone can comment ???  350μV is 0.35 or what ? 

http://www.rega.co.uk/apheta-3.html

Tracking Pressure 1.9 - 2.00g
Input load impedance 100 ohms
Output impedance 10 ohms
Nominal output voltage 350μV
Channel Balance : ≥ 20μV
Separation : ≥ -29dB

Mass 6g

Key Features :

Iron cross & coil assembly 50% smaller than the original Apheta .
One of the world’s smallest MC generators.
Cutting edge neodymium magnet.
Fine Line profile nude diamond stylus.
High specification fine wire.

Load settings for adjustable MC stages

Impedance -100ohm
Capacitance - 1000pF
Gain setting - High (’On’ position for Rega phono stages)