Cable burn-in questions.


While burning in an interconnect cable, say the analogue output from a dac into a preamp, is it necessary for the preamp to be turned on? (I understand the answer would be “yes” if that input has not been used - to “break in” those circuits in the preamp.  But this question is focused on the cable.) Is current flowing through a cable when the preamp isn’t on?  Any reason why the amp connected to the preamp output must be on?  Does the volume on the preamp matter when a cable being burned in is connected to an input? 

  I assume speaker cables would need current and voltage passing through, to be burned in.  Does the volume setting matter?

    explanations for answers will be appreciated.
128x128lloydc
Yes the preamp needs to be on.The volume can remain off.It's a tedious process.I just went through this recently - 10 hrs a day and only turned the amp on the last hour to hear the changes wrought.This particular cable sounded horrendous the first 150 hours.
Do you know anyone with a cable burner (Audiodharma Cable Cooker) would be a lot faster breakin time.
For interconnects you can make a simple DIY cable cooker. Make an adapter so you can hook up your interconnects from the amp to the speakers. Then play it at low volume ~40-50 dB’s overnight to a couple days. You will put more energy thru them in one night than having them in your system for weeks.


Just don’t crank it to max volume or you can fry a small gauge interconnect, they are not speaker cables.


Cable burn in, what a load of crap....turn it on it's on !!
Does it get better with time ? perhaps, will you hear a difference ? 
perhaps...is it cable burn in ? NO.. because audible cable/wire burn in does not exist.You don't have to believe in science or someone with multiple engineering degrees, heck if you hear it it's there ! Be happy, and if you paid for it...really happy !!