Plinth ideas for DENON PD-80 DD turntable
Genesis, The Motor in the DP75 is considerably smaller in the DP75 and the control system simpler, both are excellent machines. The DP75 and DP80 are not suitable for use with a copper mat as the platters are two layer spring loaded the weight of the copper cause the springs to sag too much. The DP7000 is also a magnificent table - have made many of these into GrooveMaster Vintage Direct DP7 https://pbnaudio.com/pbn-dp7/ Lyra in Japan has 5 of these made by us. 3 of them with the SAT tonearm Good Listening Peter |
Dear chakster, There are shops who make all kinds of stuff from acrylic. The most use laser cutting. For my former Technics SH- 10 B 4 plinth I ordered 3 arm boards for 3 different arms. They use acrylic plates which can be glued together for whatever dimensions. But you need to proved them with schematics. They cost about 100 euro each. You can use the arm board from your Denon as example so the only thing you need to do is provide them with the spindle -hole distance for each tonearm. |
