2. analog
  3. 141645-34305

Turntables

I am kicking the idea of trying out vinyl. It’s been a long time since I had a turntable and it took a lot of thought whether I can deal with what always seemed like the snap, crackle & pops of an album. Anyway, I’ve decided to take a plunge after all the buzz how awesome it is. Of course before I make any final decisions, I always turn to the Audiogon community for their expert thoughts, opinions and education. I’m also looking for suggestions for a nice affordable table with tone arm and cartridge. Being the fact this is new to me and I may hate it, I’m looking for suggestions on the best affordable set up I can do for a new or used in the price range of $1000/$1500. I’m sure I can get a better bang for the buck going used. I just don’t know anything about these animals. My system is older but I still enjoy it which consist of a Mark Levinson 23.5 amp, Proceed AVP 2+6 used for 2 channel audio, Audio Acoustics model 9 speakers, Ayre DAC for digital with Transparent Audio Ultra mm2 cables. Any input is greatly appreciated!
128x128luvrockin
sbank's avatar
sbank
3,378 posts
 
@luvrockin That's awesome to hear.You are lucky that  @gshepardbuster is one of the good guys! Cheers,
Spencer 
dramatictenor
183 posts
 
Luvrockin, so glad you’re getting good vinyl playback. Sounds like you still don’t know what caused the hum, but merely replaced one component to resolve the issue. 

I am am wondering if you are near any substantial source of RFI. We are near a large antenna and once I switched from MM to MC, I suffered many of the same issues you were having. The larger magnets on the cartridge were reacting negatively to all of the radio frequencies . I tried many things before I could rectify the issue and regain my nice dark backgrounds, which ultimately I did. 

If if you do have a source for EMI/RFI keep that in mind, because system matching and other more basic solutions will be really important, especially if you are now desiring a second system. 

Enjoy the music. 



sleepwalker65's avatar
sleepwalker65
832 posts
 
@luvrockin 

As I move the arm towards the center if the album, it gets worse wtf? It does this with the TT running and when it is off. 

Your hum problem is from the turntable power transformer and your cartridge is insufficiently shielded to block the EMI. 

luvrockin's avatar
luvrockin OP
208 posts
 
@dramatictenor & @sleepwalker65- I don think there is any extra source causing the hum. When I had the Exact 2 Cartridge in the arm, I also had a power conditioner which was used for a projector and DVD player. It was one shelf below the turntable in my rack. When it was powered up, that cartridge humid even more. When we swapped cartridges, no hum at all any time powered up or not. At the end of the day, the seller & I got the issue rectified by changing the cartridge. There’s a ton of info about hum issues from the Rega’s and the Exact 2 Cartridge. There’s also another upgraded power supply which supposedly helps this problem. At this point, I’m going to stay right where I’m at. I’ll be totally honest, although I love the sound of vinyl, I’m still having a rough time with the snap crackle and pop associated with it. Even after washing the albums and with 34% RH in the home, still get them pops. It’s a very hard decision and it’s still up in the air, but vinyl for me may be short lived :(

luvrockin's avatar
luvrockin OP
208 posts
 
Any thoughts! Always at the beginning silence to the first song on an album or sometimes in the silence between tracks I can faintly hear the start of the next tune. Does that mean anything or is that normal?
More to discover