2. speakers
  3. 128578-80822

Tekton Double Impacts

Anybody out there heard these??

I have dedicated audio room 14.5x20.5x9 ft.  Currently have Marantz Reference CD/Intergrated paired to Magnepan 1.7's with REL T-7 subs.  For the vast majority of music I love this system.  The only nit pick is that it is lacking/limited in covering say below 35 hz or so.  For the first time actually buzzed the panel with an organ sacd. Bummer.  Thought of upgrading subs to rythmicks but then I will need to high pass the 1.7's.  Really don't want to deal with that approach.

Enter the Double Impacts.  Many interesting things here.  Would certainly have a different set of strengths here.  Dynamics, claimed bottom octave coverage in one package, suspect a good match to current electronics.

I've read all the threads here so we do not need to rehash that.  Just wondering if others out there have FIRST HAND experience with these or other Tekton speakers

Thanks.
corelli
kdude66
1,200 posts
 
I have skimmed back through this thread trying to find any specific crossover points for the DI's but found no detailed info.
I asked Eric over the phone where the tweeter array crosses over at and he told me 400hz.I would imagine the 2 mids don't play up as high as you might think.I would think the 2 10 inch woofers are probably below 250hz or maybe lower.
I'm just trying to learn all I can about this speaker,If anybody has more info please chime in.
Kenny.

charles1dad's avatar
charles1dad
10,250 posts
 
Mac,
I believe that you'll be fine with the 4 ohm version based on what's been reported on this thread.  I know teajay has experienced many High quality amplifiers in his system over the years.  His enthusiasm for the 1 watt amplifiers inspires confidence. 

Tweeters cross over at 400 hz,  wow! They're covering a very wide range and apparently doing so quite successfully. 
Charles 
kdude66
1,200 posts
 
Oop's I forgot to add that the center tweeter is more a super tweeter,and is probably crossed much higher than the other 6.
I think that might be a very good combo.I will be powering my set with one of three sets of class d mono's that I currently own,just recently sold all my class a and tubes and not looking back.
Kenny.


mac48025's avatar
mac48025
672 posts
 
I agree Charles.....teajay is a huge fan of the ZOTL 40 ( he put it in his reference system in place of a Pass Labs amp) and for him to prefer the MZ over it with the DI's speaks volumes. No pun intended 😏

I had a feeling the tweeter array was crossed over quite low as it handles a good amount of the high frequencies. I think Eric's crossover points and driver selection is a big part of the DI's magic. They are seamless from top to bottom. I don't much about the details of the speaker but after living with them for over 7 months now I can say they are the best speaker I've owned in my thirty plus years in audio. I think you're in for a very pleasant surprise Kenny! 
corelli OP
1,109 posts
 
I knew the tweeter array crossed over low, but 400hz?  I think the resonant frequency of that driver is 580hz so not sure how Eric pulled that off. 
So mac, did you put your order in for the MZ2-S yet?
More to discover