Phono preamp power cable not long enough. New wall wart or use an extension cord?


My power cord for the wall wart of my phono preamp isn't long enough to reach my power conditioner. What is the best solution to fix this issue? Should I look for an aftermarket wall wart or use an extension cord? If extension cord, does the quality matter? Or will a cheap brown extension cord be find? If I should search for a new adapter, where can I find a high quality one that won't have any negative effects on sound quality. I appreciate any advice.
nemesis1218
Or another way of looking at it is, if you are using a wall wart in the first place, why worry about using an audiophile power cord?  Get an extension cord of suitable length from Loew's, at least 16ga, and you can put this problem to rest unless or until you want to upgrade your entire system.  Or find another WW with a longer DC output lead.  It really doesn't matter how you solve this problem.

I have found that any wall wart plugged into my power conditioner (Shunyata Triton) damages the sound.  I have the wall warts (turntable motor and phono pre) connected to a separate power cable (Nordost Brahma) and an Audioquest IEC outlet.  A less expensive alternative would be a power strip with attached cord.


It may be worth trying. See if they would allow you to make a return in case you don't hear an improvement. Interesting, I had never seen those before.