2. digital
  3. 1408492712

Is DEQX a game changer?

Just read a bit and it sure sounds interesting. Does it sound like the best way to upgrade speakers?
ptss
drewan77
142 posts
 
This could progress into quite a lengthy exchange & may take a while, depending on our relative time zones. What I've normally done in situations like this is have the user send me their .mzd file which I can interpret properly, make initial time alignments etc & send it back with four different profiles set - If you want to do that, use the address below

[email protected]

I'm happy to help as I well remember the frustration that can come during the initial learning process - there are a lot of parameters that interact with each other.
The software also has a lot of details that aren't totally documented. 

Andrew
almarg's avatar
Ag insider logo xs@2x
almarg
9,670 posts
 
Hi Ozzy,

I believe these paragraphs from version 2.98 of the manual may explain the issue you referred to just above.  (I assume version 3.02 of the manual provides similar information, but I haven't looked for it there):

Note - when the Save All to DEQX button is clicked, all four profiles from the open configuration are saved to the DEQX.  Since all profiles of a new configuration are disabled until you change them, if you install a correction filter in just one profile of a new configuration, then save it to the DEQX, the other profiles of the DEQX will be disabled, irrespective of what those profiles may have been before. 

Note that the DEQX Configurations saved to the DEQX unit have been generated in 'non-real time' i.e. they only affect the processing by the DEQX unit once the Save All to DEQX button is clicked.  This contrasts to changes made in the DEQX Control Panel, which affect the processing on the DEQX in ‘real time’ i.e. any change made in the DEQX Control Panel instantaneously affects the DEQX. For more on this subject see IO Manager in the Reference section.

To save a DEQX Configuration on your PC (not on the DEQX), click on the Save button once you have set up the DEQX Configuration. This also saves the measurement(s) and correction(s) you have created.

HTH.  Regards,
-- Al
 
ozzy's avatar
ozzy
7,206 posts
 
Thanks, So I need to set up all 4 profiles before I press Save All to DEQX?
almarg's avatar
Ag insider logo xs@2x
almarg
9,670 posts
 
No, but when you create a profile and do a "file/save" (which updates the .mzd file that is currently open on your computer) or a "file/save as" (which creates a new .mzd file on your computer), and then at a later time you create an additional profile and do a "file/save" or "file/save as," when you "save all to DEQX" what will be uploaded to the DEQX are the four profiles that exist (or don’t exist) in the .mzd file that is currently open.

So you can create a profile, store it in a .mzd file via a "file/save" or a "file/save as," and at a later time create an additional profile in that same file, and then a "save all to DEQX" will upload both profiles to the DEQX.

Regards,
-- Al

ozzy's avatar
ozzy
7,206 posts
 

Al,

Thanks, I got it and I can now toggle between Bypass 0 and my calibrated profile 1. This is important to me because I wanted to try additional profile settings but I was afraid I would lose my 3 hour+ calibration.

ozzy

More to discover