It looks promising hope it sounds good too!
- ...
- 120 posts total
Dear JOB customers and followers, hereafter more technical specs about the new JOB INTegrated. POWER SUPPLY Nominal line voltage: 117 or 234 V (switchable) Fuse 8A for 110V and 220V Input voltage range: +/- 10 % Rated Power Consumption: IEC 60065, 1/8 Output Power at 8 Ω: 240 W (per unit) Max Power Consumption: IEC 60065 at 8 Ω /1% THD: 700 W OUTPUT POWER FPP at 8 Ω: 190 W IEC 60065 at 8 Ω / 1 % THD+N: 2 x 175 W INPUTS USB device: - Audio Class 2.0 (no driver required on Mac OS X as of v.10.6.4 nor on Linux, driver required only for Windows) - Sample rate up to 384 kHz/Bit depth up to 32 - DSD over PCM capabilities 1 x Toslink Optical or Digital S/PDIF coaxial RCA 75 Ohms 1 x Analog RCA (Left & Right): ADC conversion for DSP correction REAR PANEL CONNECTORS AND CONTROLS 2 x output binding posts Left & Right Voltage input selector RS232 Command connector FREQUENCY RESPONSE 20 Hz - 20 kHz, unloaded: +/- 0.5 dB DISTORTION THD+N, unloaded: < 0.08 % from 20 Hz to 20 kHz at 30 VRMS output IMD (SMPTE), unloaded: < 0.02 % before clipping OUTPUT NOISE FLOOR Inputs terminated with RCA Shorting Caps, unloaded: < 10 µV from 20 Hz to 20 kH DYNAMIC RANGE 22 kHz measurement bandwidth (flat): > 100 dB GAIN 35 dB DAMPING FACTOR 220 at 1 kHz, 8 Ω In case you have any questions please use our email address [email protected]. No technical questions will be answered from this page. Have a nice evening !! |
- 120 posts total