I owned the Job 225 and liked it a lot but ultimately went a different route. Since changing my speakers out and upgrading my DAC I have been thinking about trying the 225 again, maybe picking one up second hand. When I heard the news that an integrated version would be coming out a month or two ago I started emailing the Job people. Not much has been given regarding the specs or features. Its suppose to be like the 225 with, high quality preamp, and DAC. The rest is kind of a blind shot in the dark. No financial incentive lol...if any thing I may be one of the first guani pigs.
- ...
- 120 posts total
Dear JOB customers and followers, hereafter more technical specs about the new JOB INTegrated. POWER SUPPLY Nominal line voltage: 117 or 234 V (switchable) Fuse 8A for 110V and 220V Input voltage range: +/- 10 % Rated Power Consumption: IEC 60065, 1/8 Output Power at 8 Ω: 240 W (per unit) Max Power Consumption: IEC 60065 at 8 Ω /1% THD: 700 W OUTPUT POWER FPP at 8 Ω: 190 W IEC 60065 at 8 Ω / 1 % THD+N: 2 x 175 W INPUTS USB device: - Audio Class 2.0 (no driver required on Mac OS X as of v.10.6.4 nor on Linux, driver required only for Windows) - Sample rate up to 384 kHz/Bit depth up to 32 - DSD over PCM capabilities 1 x Toslink Optical or Digital S/PDIF coaxial RCA 75 Ohms 1 x Analog RCA (Left & Right): ADC conversion for DSP correction REAR PANEL CONNECTORS AND CONTROLS 2 x output binding posts Left & Right Voltage input selector RS232 Command connector FREQUENCY RESPONSE 20 Hz - 20 kHz, unloaded: +/- 0.5 dB DISTORTION THD+N, unloaded: < 0.08 % from 20 Hz to 20 kHz at 30 VRMS output IMD (SMPTE), unloaded: < 0.02 % before clipping OUTPUT NOISE FLOOR Inputs terminated with RCA Shorting Caps, unloaded: < 10 µV from 20 Hz to 20 kH DYNAMIC RANGE 22 kHz measurement bandwidth (flat): > 100 dB GAIN 35 dB DAMPING FACTOR 220 at 1 kHz, 8 Ω In case you have any questions please use our email address [email protected]. No technical questions will be answered from this page. Have a nice evening !! |
- 120 posts total