2. speakers
  3. 1240213130

All vandersteen users ?

have been using vk55: 55wpc for a pair of vandersteen 2ce Sig2 where have been recently told by another dealer that unless we hit 200W, one cannot really imagine what these speakers are capable of ..... he mentioned immensely higher 'headroom'

now looking at either upgrading to

1. a pair of vk55 monblocks
2. or just a vk75

Speakers wise, wld be looking at going up to vandersteen quatro...

Qn: Wld 02 x vk55 monoblocks really be too little for vandersteen 2ce Sig2 OR for that matter the quatro..

any advice from any vandersteen users wld be highly appreciated...
art80342
ljs_fin
14 posts
 
Hello unsound,

I have Vandersteen 5s and I am powering them with a 60 wpc tube amp. My room is fairly large and I am quite happy with the sound level. I don't agree with the blanket statement made by the dealer.
unsound
7,311 posts
 
This thread was started by Art80342, not me and relates to the Vandersteen 2ceSig2's.
Vandersteen recommends between 30 and 200 watts for the 5a's. I think it fairly reasonable to expect the 5's with their built in amplified subs in less need of external power than the 2's. Vandersteen cautions about over amplifying.
FWIW, when possible I like to use the maximum recommended power, but always fall back on the old audiohphile suggestion of using at least double the manufacturers' recommended minimum power recommendation.
theunderlyingtheme
90 posts
 
Unsound,

Sorry 'bout that - I mistakenly thought you started the thread.
unsound
7,311 posts
 
No need to apologize, I just didn't want to hijack the thread.
ljs_fin
14 posts
 
Point taken regarding original poster and the built-in subs. I have used my 60 watt ARC amp exensively with 2s, 3s, and 5s, with roughly the same loudness results. It looks like the rated sensitivity and power recommendations are about the same for the 5 and 2CeSig2 (40 to 200 watts for the 5, 40 to 160 watts for the 2CeSig2).
More to discover