2. analog
  3. 1368048990

Next step?

I am looking for recommendations for improvements to my vinyl front end. I listen to different varieties of music, but mainly rock and jazz. I want my analog front end to rival my digital front end.

My current analog setup is a 90's vintage Systemdek I 960. This is sort of a rega planar 3 clone having a Moth 300 arm but a acrylic platter/subplatter and larger MDF plinth. I am currently using a Dynavector 10x5 cartridge but also have a Linn Adikt. I have re-wired the tonearm with Cardas wire and use a Kimber Tak H cable. I have added Michell tonearm weights and the Riggle VTA adjuster as well as the Herbie audio TT mat.

I have a PS Audio GCPH (Underwood hifi mod) as a phono pre. I use the balanced outs to a Pass XP10 pre and XA 30.5 amp. Speakers are Legacy Focus SE. My digital front end is Linn Akurate DS. I stream flac/wav files from a NAS.

I think I've basically tweaked out my current setup more than any reasonable man should. I was wondering if a new cartridge or a new TT would be the best next step (or both?) and if so how far do I need to go. For example, would a VPI Classic 3 be more of an upgrade than going to a Dynavector 20X2? Or would a Classic 1 or Rega RP6/8 be a significant upgrade? VPI Traveller? Well Tempered? Clearaudio?

I have been ripping vinyl using a HRT Linestreamer which is fantastic. This way I can buy vinyl and listen to it through the TT or stream it from the ripped file depending on the situation.

Thanks in advance for any advice.
128x128karl_desch
12 responses Add your response
karl_desch's avatar
karl_desch OP
422 posts
 
Hey Roscoeii,

I've spent a little over a week with the Anvil. It is a fantastic turntable. Very straight forward and incredibly heavy without taking too much space. I started a thread on Vinylengine if you would like to see pictures. The demo unit I have has Stillpoints Ultra SS as footers and another Stillpoints vibration device on the armboard.

Bruce provided a Roksan Nima with a DL103. I have been swapping with my modded RB300 and AT OL9 MLII.

I think this table would not hold back any cartridge or arm combo. I would also love to hear it with a Moerch.

My only complaint is a functional one. The silk suture that serves as the turntable belt is a bit finicky on the demo model. If it gets twisted a certain way it will come off the platter. Takes a while to hear this actually as the table continues to spin for a long time. This has only happened a couple times.
Bruce of Anvil, who was kind enough to set up the table in my system, told me the actual production model holds onto the belt better and thicker suture or even rubber belts are an option.

I'll let you know if I decide to go with the Anvil.

-Karl
roscoeiii's avatar
roscoeiii
1,155 posts
 
Oh, very nice. I am very intrigued by the Anvil.

IIRC, the builder of the Anvil was also using Moerch tonearms at one point, which I have become a huge fan of.

A very cool turntable. Please let us know your impressions.
karl_desch's avatar
karl_desch OP
422 posts
 
Hi Roscoeiii,
I'll be getting an in home demo of an Anvil "Alloy Convertible" turntable on Tuesday. I guess that is one perk of living in Ann Arbor, near Anvil Turntable HQ.

I'll post what I'm hearing with that nice and heavy rig.
roscoeiii's avatar
roscoeiii
1,155 posts
 
I'd upgrade the table/arm. You are in the vicinity of a Well Tempered Amadeus or Simplex, which would get you an upgraded arm and table. At $2500, you could get both a Simplex and an upgrade at cartridge (20XL if you like the Dyna sound).

Even with the wiring upgrade, I think that the RB300 is probably your weakest link.
karl_desch's avatar
karl_desch OP
422 posts
 
Jperry, Sounds like a good plan.
jperry
2,430 posts
 
I had a Rega P-25 turntable with a Dynavector 17D3 cartridge. My progression in steps was:

1. Purchase of an older Basis 2000 TT with a Basis modified Rega arm
2. Changing to a Shelter 901 cartridge
3. Changing to a Basis Vector 3 tonearm

One of the most significant changes was the last change to the tonearm. It was a stunning change that I did not expect. I think most in this hobby have made changes to their systems ands said "I think that sounds better", but this was a change where I said, "I can't believe how much better this sounds."

So in short, each of the changes made a difference, that I could hear for the better, but the quantum leap was the Basis Vector tonearm.

I hope you enjoy your quantum leap as much as I have enjoyed mine.

In the meanwhile enjoy all of the small changes along the way.
karl_desch's avatar
karl_desch OP
422 posts
 
Thanks Jjrenman, Mechans and Manitunc for your responses.

I was leaning toward a LOMC cartridge, like a Dyna 20x2L or a AT-OC9ml/iii but wanted to make sure I wasn't wasting time in the context of my somewhat ancient turntable. The logic being if the new cartridge didn't get me to where I want to be then I can always mount it on a new TT/tonearm.

I received several LPs in the mail today. One was a new release from The Knife. Its a 3LP set that included the album on CD! I like it how labels/artists are recognizing our mixed digital and analog needs.

Other experiences are welcomed. Was your analog quantum leap a new table or a new cartridge or some other tweak?

-Karl
manitunc
795 posts
 
Classic one with dyna 17d3. Less than cost of classic 3 and will be way ahead of what you have. Or a Sota Star with sme 309.
jjrenman
279 posts
 
To Mechans, Karl does not have a mediocre table. IMO the tables he is considering purchasing are a small step up from his current modified rig. However the improvement in upgrading from an entry level HOMC to a LOMC (with proper step up) is a much larger difference. The OP can not buy a "costly high end cartridge" for $2500 nor improve his TT tone arm situation all that much for that same amount of money.

I do not disagree with your statement "you nead a really good table to get the best out of costly high end cartridge" but the 10x5, although very good for the price, is hardly a high end cartridge and IME will not deliver a lot better sound on a better TT set up than Karl currently has.
mechans
3,048 posts
 
Let me apologize to you from our analog gurus' lack of contributions in answer to your question. I asked this same question in theory and got many more answers. I asked can you get great sound from a mediocre table with a really good crtridge? The answers I got at the time, (I know next to nothing about analog myself) tended to be that, you need a really good table to get the best out of a costly high end cartridge. So I will parrot that and tell you to get the better table/arm.
jjrenman
279 posts
 
I recently switched from a Dynavector 10x5 to a 20x2 low and the improvements were across the board. Much more inner detail especially in the mids on up. Better tracking. More defined bass. Also the highs were a little less forward but more accurate. BTW I have it mounted onto a RB250 arm that has simlar upgrades to yours.

So IMO you can take your current TT tonearm set up to a whole new level with a significant cartridge upgrade.
karl_desch's avatar
karl_desch OP
422 posts
 
Ok. Let me simplify. Given my current setup, would I get more bang for the buck with a $2500 investment in a new cartridge or a new turntable/tonearm?
Log in to respond
More to discover
80x80
ZYX Ultimate 4D
New Review
80x80
DaVinciAudio Labs InUnison Turntable & Grandezza Arm, Cartridge
80x80
Lenco Reference MKI