you might ask Zu (Sean) to make sure the impedance is correct for OTLs---as I recall, you can have this adjusted at the factory.
Zu speakers with Atma-Sphere M60 amplifiers
I own the latest version of the Atma-Sphere M60 amplifiers. Arriving soon are a pair of Zu Definition speakers. Does anyone here have any experience driving the Definitions with the Atma-Sphere M60 amps. Observations are most welcome. I am given to understand the Definitions are approximately 6 ohms. I'm hopeful this will still work satisfactorily.
- ...
- 16 posts total
| Post removed |
Hi folks: Thanks for the guidance here. I know the factory can implement a mod that increases the impedance but I thought that if I changed amps for any reason, the factory configuration would be more forgiving with most other amplifiers. I'm happy to hear the M60s will drive these speakers adequately. |
Check out this thread, toward the bottom: http://forum.audiogon.com/cgi-bin/fr.pl?cspkr&1259232779&openfrom&10&4#10 Ralph says he likes the Druid better with the M60s than the S30. If the Definitions are similar, they might follow suit. David |
| Post removed |
- 16 posts total