Lightspeed Attenuator - Best Preamp Ever?


The question is a bit rhetorical. No preamp is the best ever, and much depends on system context. I am starting this thread beacuase there is a lot of info on this preamp in a Music First Audio Passive...thread, an Slagle AVC Modules...thread and wanted to be sure that information on this amazing product did not get lost in those threads.

I suspect that many folks may give this preamp a try at $450, direct from Australia, so I thought it would be good for current owners and future owners to have a place to describe their experience with this preamp.

It is a passive preamp that uses light LEDs, rather than mechanical contacts, to alter resistance and thereby attenuation of the source signal. It has been extremely hot in the DIY community, since the maker of this preamp provided gernerously provided information on how to make one. The trick is that while there are few parts, getting it done right, the matching of the parts is time consuming and tricky, and to boot, most of use would solder our fingers together if we tried. At $450, don't bother. It is cased in a small chassis that is fully shielded alloy, it gets it's RF sink earth via the interconnects. Vibration doesn't come into it as there is nothing to get vibrated as it's passive, even the active led's are immune as they are gas element, no filaments. The feet I attach are soft silicon/sorbethane compound anyway just in case.

This is not audio jewelry with bling, but solidly made and there is little room (if any) for audionervosa or tweaking.

So is this the best preamp ever? It might be if you have a single source (though you could use a switch box), your source is 2v or higher, your IC from pre-amp to amp is less than 2m to keep capaitance low, your amp is 5kohm input or higher (most any tube amp), and your amp is relatively sensitive (1v input sensitivity or lower v would be just right). In other words, within a passive friendly system (you do have to give this some thought), this is the finest passive preamp I have ever heard, and I have has many ranging form resistor-based to TVCs and AVCs.

In my system, with my equipment, I think it is the best I have heard passive or active, but I lean towards prefering preamp neutrality and transparency, without loosing musicality, dynamics, or the handling of low bass and highs.

If you own one, what are your impressions versus anything you have heard?

Is it the best ever? I suspect for some it may be, and to say that for a $450 product makes it stupidgood.
pubul57
OK, don't get your back up, you just admitted you don't like the sound of your source and you wish to colour it with your Dude active tube preamp, enough said.

And yes Nelson Pass is a businessman as well, and one of very few of the very best audio designers ever, and it's a brave man to try to call him out, but he calls a spade a spade and tells it like it is as well, as his testament to passive preamps state two of my posts back.

Cheers George
You know I said all sources are flawed and they are for sure. Nothing in audio is perfect unfortunately.

Your generalizing. All sources are not flawed, maybe just the ones you've listened to are.

So instead of getting a source you like, you colour the source you have that you don't like the sound of with an active preamp.
This is a mine field of trial and error and can end up costing a substantial amount. That's fine to go about it that way, but it never ever be as transparent as no active preamp.

Cheers George
Wow, you have the perfect source! Please let me know what it is. Also, please let me know the perfect speaker, amp, and well you already have the perfect preamp.

No kidding. I really want to know what you consider perfect beyond your passive.
It all starts with the source, in your equipment.
It sounds very good to me, and I have no wish to change it's sound or colour it in any way.

Cheers George