I thought I should post this on the Audiogon for people how may have the Morch UP-4 Arm.
I had noticed on my instructions from Morch that"The height of the pickup lifter is adjusted so that the stylus is about 4mm above the record,when the pickup lifter is in the raised position.Well I had to look up the conversion metric tables on the internet,and this is about only under one eight of an inch or so.Here I had my arm up ATLEAST 1 INCH OR MORE.I then realized my VTA was off so far I haven't been able to hear what my front end really sounded like yet.
I know what it sounds like now.WOW IS ALL I CAN SAY.I don't think people realize just how good this arm really is unless its properly installed and all alignments are right on.
Well I just thought I should post this for Morch owners.Also the supplied arm cable that comes with the arm
is very good indeed,once the VTA is dialed in.I was looking for a new arm cable,but I think people need too seriously set up your front end correctly first.You may save yourself
money by not really needing other arm cables.