Psychicanimal,you are correct when you say the weak link is the turntable,but there are ways around this.Firstly check the speed with a downloadable strobe from Extreme Phono's site.Planar 3's are usually 1-2% fast.To correct this, 2 equal spliced... length's of electrical tape wound around the rim of the sub-platter to widen it, cures this.Mine works fine.Experiment with the number of layers,testing with the strobe,and trim it.As regards a cartridge,both those MM's do not have a high enough frequency response.The Sumiko Blue Point Special or Denon 103 is ideal in this price range,if you can get a step-up or phono stage for MC.The Ortofon X5-MC is High Output MC and can be used in the existing stage.The platter can be easily replaced with an acrylic one,either bought off the web or you can have it machined cheaper.This table can go up against a $10,000 digital front-end when set-up right.stefanl
Goldring 1042 or Rega Exact
I currently own a Rega Planar 3 turntable with a Rega Elys cartridge. It sounds okay, but my digital front end (CAL Delta transport and Musical Fidelity A324) kills it. I am thinking of changing the cartridge, and have pretty much narrowed it down to the Goldring 1042 or Rega Exact. I am leaning towards the Exact for obvious reasons (i.e., Rega, Rega) but have read good things about the 1042. Feedback from any 1042 or Exact owners is appreciated.
As a side question, I am thinking of purchasing one of these two cartridges from Hong Kong suppliers here on Audiogon. Their feedback is extremely positive. Has anybody had a bad experience with purchasing over seas that I should know about?
Thanks in advance for your input, and Happy Thanksgiving.
As a side question, I am thinking of purchasing one of these two cartridges from Hong Kong suppliers here on Audiogon. Their feedback is extremely positive. Has anybody had a bad experience with purchasing over seas that I should know about?
Thanks in advance for your input, and Happy Thanksgiving.
- ...
- 12 posts total
- 12 posts total