2. analog
  3. 996327339

TT opinions please

I've been lurking in the background for several days now, and I've observed that there are quite a few knowledgeable souls out there. I've been into audio for better than 20 years, (with several unexplained lapses), and I've floated back into vinyl. It's definately time to swap out the old TT, (a B&O TX w/MMC3), and I'm considering several alternatives, among them:
Rega P3 w/ Origin Live RB250, New
Arison RD11s w/ AQ arm, Used
Basis 1400 w/RB300 arm, Used
VPI 19jr. w/ AQ arm, Used
Linn LP12, several flavors of arms, used
maybe a Pro-Ject Perspective, New
or perhaps a Michell Gyro SE w/ RB300, New

Some of these I've heard, most of them I have not. I tend to prefer fairly sharp highs, moderate midrange bloom, and a tight bottom end. This will be connected thru a Musical Fidelity XLP, Adcom 750 preamp, Parasound HCA-1200 and PSB Stratus Golds.

I'm not exactly poor, but I am cheap! Any thoughts, opinions, directives, etc? Thanks in advance for the help!
geezer
krellboy
13 posts
 
Well Tempered Turntable. Part of the fun in vinyl is having a great sounding table that can work with every cartridge. This table allows you to adjust everything. VTA (hieght} Cartridge angle, overhang, etc etc. This table will give you a very open sound and good bass. You'll also learn quite a bit about the differences in sound quality based on the way you set up the table (more fun than set and forget)
You need to get the "black damped platter" so it might be a little hard to find but thier relatively inexpensive.
The Blue point Special cartridge works excellent with this table ' and again cheap'
gmele
93 posts
 
I would have to agree with Albert. The Basis 1400 with the Rega arm is a great combo. This table is also a great match for the Graham arm or the Morch arm, which is what I am thinking of upgrading too. Also the Dynavector 10x4 is a great cartridge in the $350 range, I would highly recommend it with that combo. When I upgrade to the Morch arm I will most likely go with a cartride in the Benz line. Any recommendations out there would be most welcomed. Best-Gary
jfrech's avatar
jfrech
1,816 posts
 
Geezer, I bought a new p25 from music direct for $1000. It was 6-8 months ago. The salesperson pretty much offered that price with out any negotiation on my part. The p25 get's you a better arm rb-600 which has better cables, counterweight and better bearings (or maybe tolerance-not exactly sure which one. The turntable has a little different plinth and motor than the p25. Hope this helps...

PS, I've also found putting the table on DH cones and sq's helps a bunch...
geezer OP
2 posts
 
Jfrech, thanks for the advice. I've just finished reading Todd Warnke's review of the P25, (http://www.audioweb.com/Review/), which seems to agree with your and Revdog's comments.

BTW-The Origin Live site gives some good information on the differences between the various Rega arms, (all within the context of their mods, of course). See http://www.tonearm.co.uk/rb900.htm#physicaldifferences.

As I dig more, the VPI tables seem to need to be at the Mk III or IV level or better to approach the performance that I was looking for. But, until I get a chance to audition one, who really knows?

Albertporter and Gmele - Based on your comments, I am now also looking more closely at the Basis 1400 with Rega arm. Thanks!
mcne
113 posts
 
I went back into vinyl for the past year. I shopped around and ended up with a Project Perspective with a Blue Point Special cartridge. It has a suspended chassis that deals with my hardwood floors. I also invested in a Nitty Gritty 1.5 Si record cleaner which works great. This turntable is really easy to setup and mess with and try different configs on it. But I think that I still don't have the "vinyl" sound. I am at the point where I need to improve my phono preamp and maybe move to a Grado Platinum cartridge. But it has been fun. I received the new turn table with cartridge for $825 out the door. Dale
More to discover