Teresonic Ingenium Silver loudspeakers


Has anyone heard them in a home set-up and what did you think of them?
Jack Roberts of Dagogo gives them a glowing review but, I would like some goners thoughts.

Thanks,
Joe
snopro
Volti Vittora is 104 db. I power the 99db Volti Alura easily with 12.5 watt Allnic A1500, but if your talking under 8 watts I might have to agree with Pani. When I was talking with Greg Roberts, about an amp for the Alura, he talked me out of the low watt Yamamoto amp. He uses the 15-20 watt Border patrol at shows.

Good thing is , I don't think you can go wrong with any of your choices.
Sensitivity is one thing. Many/most older JBL, TAD, Tannoy speakers were high sensitive but they always needed some power from the amp to play under control. Those big drivers did not exactly have light weight cones and needed some damping from the amp to play clean. The impedance curve were also not exactly SET friendly (which expects 10 ohms+ at all frequencies for ideal playback). The Volti drivers are also inspired from one of these designs hence they have similar behaviours. With a low powered SET one can get good sound at relatively moderate volumes but once you decide to crank it up, the amps will quickly run out of gas and sound will lose its grace/compusure. I would suggest 15 watts minimum if one is going with SET.

On the other hand typical single driver speakers (Lowther, Fostex, Tangband) will go plenty loud with just 3 SET watts. It is a different ball game. The sound is probably purer but lacks the outright force and dynamics of the big drivers.

To the OP,

Have you had a chance to hear the Teresonics? If so, which ones, and what where your impressions?