2. cables
  3. 1330978952

Longest Advisable Speaker Cable Runs?

I've always heard 8-10' is ideal.
I'd like to move my gear rack to the side of my listening room-I've seen this done in the Virtual Systems section with what must have been some pretty long runs of Speaker Cable. I would probably need 30 feet to the furthest speaker.
My amp is low watt-around 10 per channel SO that could effect cable run length?
Any help is appreciated.
128x128dpgdave
dpgdave's avatar
dpgdave OP
16 posts
 
I'll look into both those options. The Bent Audio Attenuator may be a bit to ambitious-I'm not much of a DIYer but I'll check it out. I'll also look to Sjogn for a Supra Cable recommendation and price quote. You guys are awesome. Thanks for all the help.
Dave
almarg's avatar
Ag insider logo xs@2x
almarg
9,670 posts
 
Tony (Clio09), it looks like the shielded Ply S3.4 is currently $36/meter/pair, rather than $26.

Dave, if you go with a shielded cable, such as that one, you'll have to determine a circuit ground point on the amp to connect the shield (the "drain wire") to. Since your amp is described as having bridged outputs, the negative (black) output terminal carries a signal, rather than being ground.

Regards,
-- Al
clio09
3,343 posts
 
Thanks for the correction Al. Need to use the calculator next time. Still quite reasonable for such a long run.
ebm
9,311 posts
 
20Ft should me the max.
More to discover