Which Cable Makes the Biggest Impact?

Well Tony, I for one, agree with you. As much as it irritates me to admit it, I now believe that the power cord has the most influence on the sound, by a large margin. I fought the power cord concept for years, but after 5 years of experimenting, this is now the conclusion that I hold. Second is the interconnects, though followed more closely by the speaker cables.

So I'll also say:

1) Power cords
2) Interconnects
3) Speaker cables

Cheers,
John

I think it's where you use the cables first that matters.

1. Treat the source first with the best power cable and interconnect that suits it.
2. Then the power conditioner with the best power cable. 3. Than the preamp with the best interconnect and power cord that suits it.
4. Speaker cables are next.
5. Amplifier last with interconnect and power cord.

This is what I experienced in my system.

In my experiences with two separate systems (one analog-one digital HT), I found that power cords had the most sonic characteristics from cord to cord. In an effort to get close to neutrality, dedicated circuits & quality outlets made the most substantial improvement where I no longer use exotic P/C's as tone controls. Given this, I then give the nod of importance to I/C's and speaker. My belief is that the quality of the wire itself and the end connections are far more important than exotic cable geometries. YMMV as mine has.

My house and associated electrical wiring are new and I have a dedicated line for the equipment with a separate dedicated line for the amp. I use a Running Springs Jaco conditioner.

Guess what?

The power cords still have the greatest impact on the sound.

I use all Virtual Dynamics Nite cords 'n cables with great success and the order that makes the biggest gains in performance are:

1) Power Cords
2) Interconnects
3) Speaker Cables

Interesting. Re power cords, how is it that after that electricity is generated at the plant it goes through numerous wires, transformers, taps, circuit breakers, cables, wires, meters, protections devices, etc. before it gets to your house and then somehow a power cord cleans all this up and upgrades the sound?

I'm not denying a power cord makes a difference just trying to understand the rationale. I would believe a power conditioner of some sort would have an effect but a power cord, I just don't see the logic.

regards, David