SME 20/3 or Oracle Delphi VI or Garrard 301

Agree with Syntax, SME will be around forever to service this ( their main business is military equipment ), and with the new power supply/thicker chassis etc this is the bargain of the SME line. In many ways the SME IV is a better arm now that it has the same bearings as the V, but no damping/VTA whilst playing mechanisms that muddy the sound. I recall that Bob Graham used an SME 30 for a long time so I would be confidant the Graham is a good match.

Mahalo Syntax.
Do you know when they changed the bearing in the IV?
I purchased mine about 4 years ago.
Aloha!

Sorry I meant to direct that last post @ Dover :-)

This isn't a response as such to the original question but this thread like so many others ha evolved somewhat in an interesting direction and i'd just like to add something.

I bought a SME 20/2 last year at the end of the run of the Mark 2 which came with the charcoal coloured platter. I bought it without an arm as i had a SME IV arm that i'd been using on a SME Model 10 that i was going to use on the 20 and put another arm on the 10 which i'd kept for a second system. The cartridge was an Ortofon Cadenza Black. Over 6 months or so, as much as i liked the Model 20 i felt there was something holding it back but i couldn't put my finger on it. The Cadenza Black just wasn't giving me the excitement that an Ortofon Jubilee was when that was on the same arm but on the Model 10 turntable.

A new Ortofon AS212S tonearm came up for auction on Ebay so on a whim i bought it and ended up with it at half retail. Mounted on the Model 20 with the Cadenza Black hanging off the end it is a stunning combination with more detail, wider and deeper soundstage and all the usual audiophile cliches, but most of all is so much fun. I've never doubted the qualities of the IV arm but there is something in the synergy between cartridge and tonearm that makes all the difference.

Now if SME would put their skills to building a cartridge.............:>)

SME IV bearings- not sure when they changed to the same as the V but read it in a recent review ( possibly a review of the 20/3). I suspect it is relatively recent, but check with SME directly. Their aftermarket service support is excellent. If I was buying an SME arm I'd probably get the SME IV and rewired cartridge to phono with one run of Cardas. I believe SME will rewire these for you with any wire you want if you provide it.